Bykski
D5 Pump Reservoir Combo - Bykski CT-D5-180-X-V2, 350 mL, G1/4, PWM
D5 PWM pump and reservoir for custom PC water cooling
The Bykski CT-D5-180-X-V2 combines a D5 PWM pump and a 350 mL acrylic reservoir in one assembly. It circulates coolant in a custom PC water cooling loop with G1/4 fittings. The reservoir has a dedicated top fill port and clear windows so you can check the coolant level as you fill and bleed the loop.
Fittings & Mounting
- ✓G1/4 threaded fittings for the loop connections
- ✓120 mm chassis fan hole pattern with the Bykski B-BKT-105 bracket
Use in a loop without aluminum parts in contact with the coolant. Check case clearance for the assembly, fittings and access to the top fill port.
Design Highlights
Separate return and fill openings
Connect the tubing from your loop to the top return inlet. Use the other top opening to add coolant or let air escape while filling.
Aluminum outer housing
The pump sits below the acrylic reservoir in a black housing. The aluminum exterior stays outside the coolant path.
Separate power and speed control
The 4-pin Molex connector draws power from the PC power supply. The separate 4-pin PWM connector sends speed feedback and takes speed commands from a compatible header or controller.
Key Specifications
| Model | CT-D5-180-X-V2 |
|---|---|
| Assembly | Black D5 PWM pump and reservoir |
| Reservoir | 350 mL clear acrylic (PMMA) |
| Housing materials | POM and aluminum alloy |
| Body (H × W × D) | 266.6 × 75 × 75 mm |
| With bracket (W × D) | 116 × 94 mm as shown |
| Return, fill and outlet thread | G1/4 |
| Rated pump voltage | 12 V DC |
| Pump connections | 4-pin Molex power and separate 4-pin PWM |
Which Version Do I Need?
What's in the Box
The D5 pump, aluminum pump housing and reservoir with top cap come assembled.
Installation & Use
You also need G1/4 fittings, matching tubing, coolant, the water block or blocks for your hardware, a radiator and radiator fans.
FAQ
How much coolant does the reservoir hold?
The reservoir holds 350 mL.
Can I mount it at a 120 mm fan position?
Yes. Use a Bykski B-BKT-105 bracket and check your case clearance.
Where do I add coolant?
Use the separate fill port on the top cap. The other top port is the loop return inlet.
Which connector supplies pump power?
The 4-pin Molex connector supplies 12 V DC power. The separate 4-pin PWM connection is for speed control and feedback.
- Keep coolant in the reservoir while bleeding the loop to avoid running the pump dry.












