Bykski
D6 PC Water Cooling Pump and Reservoir Combo | Bykski CP-NWD6-X-CT60
D6 pump and reservoir combo for custom PC water cooling
The Bykski CP-NWD6-X-CT60 combines a D6 pump and a clear tube reservoir for a custom PC water cooling loop. The reservoir holds coolant and lets you see the fill level, while the PWM-controlled pump circulates coolant through the loop. Connect it with G1/4 fittings and choose a reservoir length that fits your build.
Use With
For custom PC liquid cooling loops.
- ✓G1/4 loop fittings
- ✓12 V power from a PSU’s 4-pin Molex peripheral connector
- ✓A PWM header or controller for pump speed control
- ✓For the RBW option, a 5 V 3-pin ARGB header or compatible controller
Use a matching ARGB adapter for a motherboard connection. Do not connect the RBW lighting lead to a 12 V 4-pin RGB header.
Design Highlights
Clear reservoir above the D6 pump
The PMMA acrylic tube lets you check the coolant level while filling and bleeding the loop. The D6 pump uses a ceramic shaft and an aluminum alloy outer housing.
Four reservoir lengths
Each cover option comes in 60, 100, 150, and 200 mm reservoir lengths. Measure your available space for the complete pump and reservoir assembly, with extra room to reach the fill port.
A choice of pump covers and lighting
Choose a black POM pump cover, a clear acrylic cover with RBW lighting, or a clear acrylic cover without lighting. The RBW option uses a separate 5 V 3-pin ARGB connection.
Key Specifications
| Model | CP-NWD6-X-CT60 |
|---|---|
| Pump core | CP-D6PB-X brushless DC centrifugal pump |
| Reservoir tube | Clear PMMA acrylic |
| Pump cover | Clear acrylic or black POM |
| Pump housing diameter | 81 mm (black POM and 60/100 mm clear RBW) |
| Reservoir section lengths | 60 / 100 / 150 / 200 mm |
| Overall height, clear RBW | 147.7 mm (60 mm), 187.7 mm (100 mm) |
| Overall height, black POM | 136.7 / 176.7 / 226.7 / 276.7 mm, in order of reservoir length |
| Loop fitting thread | G1/4 |
| Maximum pump flow | 720 L/h |
| Pump speed | 1,800–4,800 RPM |
| Rated pump input | 12 V DC, 1.85 A, 22 W |
| Pump connections | 4-pin Molex power and separate PWM / tach lead |
| Lighting connection (RBW option) | 5 V 3-pin ARGB |
Which Version Do I Need?
Check the model number when comparing Bykski pump and reservoir combinations.
What's in the Box
Installation & Use
To complete the loop, you’ll also need G1/4 fittings, matching tubing, a radiator, water block and coolant.
FAQ
How much power does the D6 pump draw?
Bykski specifies 22 W of pump input power at 12 V DC and 1.85 A.
Does the PWM cable supply pump power?
Pump power comes from the PSU’s 4-pin Molex peripheral connector. The separate PWM lead controls speed and carries the tach signal.
Is the selected length the overall height?
The 60, 100, 150, and 200 mm options describe the reservoir section. Include the pump housing when measuring your mounting space.
Which version has addressable lighting?
Choose RBW for 5 V 3-pin ARGB lighting. The clear unlit option comes without lighting.
What fittings fit this combo?
Use G1/4 fittings that match the tubing in your custom loop.
- Brand manufacturers reserves right to alter block design to expand compatibility.
- Delivered item may not 100% match pictured item.
- In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.













