Bykski
480mm Copper Radiator, 100mm Thick — Bykski CR-RD480RC-TK100
480 mm copper radiator for custom PC liquid cooling
The Bykski CR-RD480RC-TK100 is a 100 mm thick radiator with a copper fin-and-tube core and mounts for four 120 mm fans. It transfers heat from the coolant in a custom PC loop to the air passing through the fins. The radiator body is 528.5 mm long, so measure the mounting space before ordering.
Fan and Mounting Fit
Check the fan layout, clearance, and port thread.
- ✓Four 120 mm fans in a 480 mm radiator layout
Measure your case or mounting bracket against the 528.5 × 122 × 100 mm body. Allow extra space for the fans, fittings, and tubing bends.
Design Highlights
Four fan positions in a row
The port end extends past the four fan positions. Use the overall body length in the drawing to plan clearance around that end.
Copper fins and four layers of coolant channels
The core combines four layers of coolant channels with W-shaped copper fins. The folds increase the fin surface area exposed to the airflow.
Key Specifications
| Model (SKU) | CR-RD480RC-TK100 |
|---|---|
| Series | RC Series |
| Size class | 480 mm |
| Body (L × W × T) | 528.5 × 122 × 100 mm |
| Fan positions | 4 × 120 mm in one row |
| Core material | Copper fins and tubes |
| Coolant channels | Four layers |
| Finish | Black |
Which Version Do I Need?
Compare body thicknesses for the same 480 mm fan layout. Check the overall length and fitting thread on the version you choose.
What's in the Box
Installation & Use
For the loop, plan for 120 mm fans, fittings, matching tubing, a pump, a reservoir, water blocks, and coolant.
FAQ
How much space do I need for a case or external mount?
Check the mounting surface and the space around it against the 528.5 × 122 × 100 mm body. Leave additional clearance for the fan stack, fittings, and tubing.
How do I choose fittings for this radiator?
Confirm the thread on the ports you plan to use before ordering fittings. Match the tubing side of each fitting to the tubing in your loop.
How many fans fit across the radiator?
The 480 mm layout takes four 120 mm fans in a row.
What fan screws should I use?
Bykski’s installation guide specifies M3 × 28.3 mm screws for typical 25 mm thick fans. Choose the screw length to suit your fan if its thickness or mounting holes differ.
- Bykski notes that high-temperature soldering can slightly change the color of exposed copper.











