• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

480mm Copper Radiator, 100mm Thick — Bykski CR-RD480RC-TK100

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · CR-RD480RC-TK100

480 mm copper radiator for custom PC liquid cooling

The Bykski CR-RD480RC-TK100 is a 100 mm thick radiator with a copper fin-and-tube core and mounts for four 120 mm fans. It transfers heat from the coolant in a custom PC loop to the air passing through the fins. The radiator body is 528.5 mm long, so measure the mounting space before ordering.

Fits
4 × 120 mm fans
Body thickness
100 mm
Core
Copper fins and tubes

Fan and Mounting Fit

Check the fan layout, clearance, and port thread.

  • ✓Four 120 mm fans in a 480 mm radiator layout

Measure your case or mounting bracket against the 528.5 × 122 × 100 mm body. Allow extra space for the fans, fittings, and tubing bends.

Design Highlights

Bykski CR-RD480RC-TK100 black radiator at an angle showing the fan mounting rails and threaded openings at one end

Four fan positions in a row

The port end extends past the four fan positions. Use the overall body length in the drawing to plan clearance around that end.

Bykski CR-RD480RC-TK100 exploded illustration showing the copper core between the side plates and end tanks

Copper fins and four layers of coolant channels

The core combines four layers of coolant channels with W-shaped copper fins. The folds increase the fin surface area exposed to the airflow.

Key Specifications

Model (SKU)CR-RD480RC-TK100
SeriesRC Series
Size class480 mm
Body (L × W × T)528.5 × 122 × 100 mm
Fan positions4 × 120 mm in one row
Core materialCopper fins and tubes
Coolant channelsFour layers
FinishBlack
Bykski CR-RD480RC-TK100 dimension drawing showing the radiator from above and from the port end

Bykski’s body dimensions in millimeters.

Which Version Do I Need?

Compare body thicknesses for the same 480 mm fan layout. Check the overall length and fitting thread on the version you choose.

100 mm radiatorTHIS PAGE
Choose this version if your mount has room for the 100 mm body plus the fans and fittings.
Select the 480 mm option if your mount has clearance for a 60 mm radiator body plus the fans.
Select the 480 mm option if you need more room for the fans or nearby components.

What's in the Box

1 × CR-RD480RC-TK100 radiatorFan-mounting screws

Installation & Use

1
Flush the radiator to remove possible manufacturing residue, then drain it before adding coolant.
2
Test-fit the radiator and fans. Use screws suited to your fan thickness and mounting holes. Overlong screws can puncture the coolant tubes.
3
Mount the radiator and fans. Use fittings that match the radiator's port threads and your tubing, and seal any unused ports.
4
Fill and leak-test the loop before powering the PC hardware.

For the loop, plan for 120 mm fans, fittings, matching tubing, a pump, a reservoir, water blocks, and coolant.

Bykski CR-RD480RC-TK100 installation guide illustration showing fan screws in red beside coolant tubes in a radiator cross-section

Bykski’s illustration shows how screw length affects clearance to the coolant tubes.

FAQ

How much space do I need for a case or external mount?

Check the mounting surface and the space around it against the 528.5 × 122 × 100 mm body. Leave additional clearance for the fan stack, fittings, and tubing.

How do I choose fittings for this radiator?

Confirm the thread on the ports you plan to use before ordering fittings. Match the tubing side of each fitting to the tubing in your loop.

How many fans fit across the radiator?

The 480 mm layout takes four 120 mm fans in a row.

What fan screws should I use?

Bykski’s installation guide specifies M3 × 28.3 mm screws for typical 25 mm thick fans. Choose the screw length to suit your fan if its thickness or mounting holes differ.

Notes
  • Bykski notes that high-temperature soldering can slightly change the color of exposed copper.

FormulaMod Official Store

Recent Reviews
+