• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Lian Li O11 Dynamic Water Cooling Kit — Bykski RGV-LAN-O11-LI-P (Intel)

stars, based on ( 1 ) reviews
€530.12 piece
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-LAN-O11-LI-P

Hardline water cooling kit for the Lian Li O11 Dynamic

The Bykski RGV-LAN-O11-LI-P is a custom water cooling kit for the original Lian Li PC-O11 Dynamic with an Intel CPU. Its front-mounted acrylic distro plate gives the CPU block, a single GPU block, and the radiators dedicated connection points for routing rigid tubing through the case.

Fits
Lian Li PC-O11 Dynamic
Pump type
DDC
Distro plate ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check your case label and block fit before ordering.

  • ✓Lian Li PC-O11 Dynamic (O11DX, black)
  • ✓Lian Li PC-O11 Dynamic (O11DW, white)

Before ordering, confirm which CPU sockets the kit’s mounting hardware supports. If you plan to cool your GPU, send us the card’s exact model and PCB revision to check block fit.

Bykski RGV-LAN-O11-LI-P installed at the front of a Lian Li PC-O11 Dynamic in a lit example build

Manufacturer’s example build.

Design Highlights

Bykski RGV-LAN-O11-LI-P clear acrylic distro plate with visible coolant channels and a black finned DDC pump cover

Acrylic channels with a rear-mounted pump

The DDC pump mounts to the back of the clear plate. Channels in the acrylic route coolant between loop components.

Bykski RGV-LAN-O11-LI-P acrylic distro plate lit in blue, pink, and cyan with a black pump mounted to the plate

5V addressable lighting

Bykski calls its 5V addressable lighting RBW. For motherboard control, use the included 5V ARGB motherboard sync adapter cable and align its arrow with the 5V pin on the 3-pin ARGB header. Never connect it to a 12V 4-pin RGB header.

Bykski RGV-LAN-O11-LI-P front distro plate port diagram numbered 1 through 9

Front plate port map

Use Bykski’s diagram to identify the radiator, CPU and GPU connections before measuring your tubing.

  • 1 and 3 · Radiator connections
  • 2 · Fill and vent
  • 4 and 5 · CPU outlet and inlet, respectively
  • 6 and 7 · GPU outlet and inlet, respectively
  • 8 · Adjustment module mounting points
  • 9 · Drain

Key Specifications

Bykski modelRGV-LAN-O11-LI-P
Kit platformIntel CPU with single-GPU loop layout
Mounting positionFront of case
Distro plate materialClear acrylic
Distro plate face (H × W)413 × 198 mm
Distro plate port threadG1/4
Reference hardline tubing size14 mm outside diameter
Reference radiator sizes360 mm and 240 mm
Reference fan size120 mm
Lighting5V 3-pin ARGB (Bykski RBW)
Bykski RGV-LAN-O11-LI-P manufacturer drawing of the distro plate face with its 413 mm height and 198 mm width

Plate face shown horizontally. Installed height 413 mm, width 198 mm.

Which Version Do I Need?

RGV-LAN-O11-LI-P Intel KitTHIS PAGE
Choose this kit for an Intel hardline loop in the original O11 Dynamic. The reference configuration lists a CPU block, two radiators, and 14 mm OD tubing.
Choose the matching front plate and covered pump if you already have the rest of the loop.
Choose the EVO-specific plate if your case is the O11 Dynamic EVO.

Manufacturer Reference Kit Contents

1 × front distro plate1 × DDC pump1 × Intel CPU water block (optional in the manufacturer's reference kit; when included, it comes with a motherboard mounting backplate — confirm before ordering)1 × 360 mm radiator1 × 240 mm radiator8 × 120 mm fansRadiator and fan mounting screws8 × 14 mm OD acrylic hard tubes16 × 14 mm OD hard-tube fittings4 × 90° rotary fittings3 × 10 mm extenders2 × 15 mm extenders1 × mini G1/4 male-to-male coupler3 × stop plugs1 × drain valve1 × vent valve (current Bykski reference configuration)1 × 5V ARGB controllerIncluded motherboard sync adapter cable for 5V 3-pin ARGB1 × port adjustment modulePlate mounting hardware and hex key

The parts list and quantities are based on Bykski’s reference configuration. Contact us before ordering to confirm your kit configuration.

Bykski lists a full-cover GPU block as optional in its reference configuration. If your order includes a GPU block, contact us after ordering to confirm your graphics card model and PCB revision so we can match the block to your card.

Installation & Use

1
If the pump comes detached, seat the O-ring in its groove, set the pump against the mount, and tighten the screws evenly in a diagonal pattern.
2
Fit the plate at the front of the case. Dry-fit the radiators, then mount each water block according to its own instructions.
3
Use the port map above to plan each run. Measure and cut the hard tubes, then connect the blocks and radiators with the matching fittings. Keep the fill and drain ports accessible.
4
Use the 5V ARGB controller, or connect the lighting to the motherboard with the included 5V ARGB sync adapter cable. Align its arrow with the 5V pin on the 3-pin ARGB header and avoid the 12V 4-pin RGB header.
5
Pressure-test the assembled loop before adding coolant. Once it passes, fill the loop and bleed air before normal operation.

Have your case, PC hardware, coolant, hard-tube tools, and a loop pressure tester ready before you start.

Bykski RGV-LAN-O11-LI-P exploded pump installation diagram showing the pump, O-ring, and mounting screws

Manufacturer drawing showing the position of the pump seal and screws.

FAQ

Which Lian Li O11 Dynamic case fits this kit?

Use this kit for the original PC-O11 Dynamic, model O11DX or O11DW. Check the label on your case before ordering.

How do I choose a GPU water block?

Send us the exact graphics card model and PCB revision to check block fit. Before ordering, confirm whether a compatible block comes with the kit or is sold separately.

What tubing and fittings does the kit use?

The reference kit uses 14 mm OD acrylic hard tubing with matching rigid-tube fittings. G1/4 is the thread on the distro plate’s ports.

Do I need to buy coolant?

Yes. Supply your own coolant and avoid oil-based or corrosive fluids, alcohol, and high concentrations of ethylene glycol, as specified by Bykski.

Product Gallery

Bykski RGV-LAN-O11-LI-P example build with red tubes and an illuminated front plate viewed from the front corner
Bykski RGV-LAN-O11-LI-P example build in three views showing the angled case, the front panel, and the side of the loop
Bykski RGV-LAN-O11-LI-P clear distro plate rendering with a black finned pump and visible coolant channels
Bykski RGV-LAN-O11-LI-P opposite face of the clear plate showing coolant channels and fasteners
Bykski RGV-LAN-O11-LI-P acrylic plate and pump under orange, green, and blue lighting
Bykski RGV-LAN-O11-LI-P acrylic plate and pump under purple and cyan lighting
Bykski RGV-LAN-O11-LI-P three-quarter installed view with the graphics card and lower fans visible
Bykski RGV-LAN-O11-LI-P complete display build with red hardlines and the lit front distro plate
Notes
  • The program kit, which only include the products in the corresponding program kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display. The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • This waterway board is only compatible with the corresponding case, may not be compatible with other cases.
  • *For GPU block, please contact seller to determine the GPU details before order.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc., If not notified in time, the Bykski's latest real object and the newest list shall prevail
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+