• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

AMD SP3 Water Block – Bykski CPU-SP3-SR with TR4 / SP6 Support

stars, based on ( 0 ) review
€62.90 piece
items available
Contact Us
FormulaMod Official Store
Bykski · CPU-SP3-SR

CPU water block for AMD EPYC and Threadripper

The Bykski CPU-SP3-SR is a CPU water block for custom liquid cooling on platforms such as AMD EPYC SP3 servers. Its copper cold plate draws heat from the processor, and jet microchannels carry coolant across the plate. Two G1/4 ports connect the block to your loop.

Fits
AMD SP3 / TR4 / SP6
Cold plate
Copper
Ports
2 × G1/4

Compatibility

Supported AMD CPU sockets

  • ✓AMD EPYC — Socket SP3
  • ✓AMD Ryzen Threadripper — Socket TR4
  • ✓AMD EPYC — Socket SP6

Not compatible:

  • ✗AMD EPYC — Socket SP5

Before ordering, check your motherboard’s CPU socket and the space around its mounting points.

Design Highlights

Bykski CPU-SP3-SR black water block viewed from above at an angle, showing two threaded ports and spring-loaded mounting screws

Two top-mounted G1/4 ports

Connect the block to your custom loop with G1/4 fittings sized for your tubing.

Jet microchannels

Coolant passes between the fins in the copper cold plate, where it picks up heat from the processor.

Key Specifications

ModelCPU-SP3-SR
ConstructionCopper and brass
CPU contact plateCopper
Port thread2 × G1/4
ColorBlack
Bykski CPU-SP3-SR underside showing the reflective rectangular cold plate and the ends of the mounting screws

The flat cold plate faces the CPU.

Which Version Do I Need?

Use your motherboard’s socket to choose between the two block models.

Bykski CPU-SP3-SRTHIS PAGE
Choose this block for a custom loop on an SP3, TR4, or SP6 motherboard.
Choose this block for an AMD EPYC motherboard with Socket SP5.

What's in the Box

1 × CPU water blockMounting hardware

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down and disconnect power. Remove the motherboard from the chassis and take off the existing CPU cooler.
2
Clean the CPU lid and the block’s contact plate. Apply your own thermal paste evenly to the CPU lid.
3
Align the block with your socket’s mounting points. Tighten the mounting screws gradually in the order marked on the block.
4
Connect the block to the loop with G1/4 fittings. Check for leaks before powering the motherboard.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Will this fit my EPYC motherboard?

Use this block if your AMD EPYC motherboard has Socket SP3 or SP6. For Socket SP5, choose the CPU-SP5-SR.

Can I use it on a Threadripper TR4 workstation?

Yes. Socket TR4 is listed for the CPU-SP3-SR. Check the socket in your motherboard specifications before ordering.

What fittings do I need?

Use G1/4 fittings for both ports. Match the fittings to the tubing in your loop.

What else do I need to cool the CPU?

Use the block with a pump, radiator, fittings, tubing, and coolant in a custom loop.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.

FormulaMod Official Store

Recent Reviews
+