Bykski
SP5 CPU Water Block for AMD EPYC – Bykski CPU-SP5-SR
SP5 CPU water block for AMD EPYC
The Bykski CPU-SP5-SR is a CPU water block for AMD EPYC processors on Socket SP5 in a custom liquid cooling loop. Its nickel-plated copper cold plate transfers heat from the CPU to coolant passing through its microchannels. Two G1/4 ports connect the block to your loop.
Compatibility
AMD Socket SP5 (LGA 6096) only.
- ✓AMD EPYC 9004 Series on Socket SP5
- ✓AMD EPYC 9005 Series on Socket SP5
Not compatible:
- ✗AMD Socket SP3
- ✗AMD Socket SP6
- ✗AMD Socket sTR5
- ✗AMD Socket SP7
Before ordering, verify the socket on your motherboard and check the clearance around it against the block dimensions below.
Design Highlights
Two top-facing G1/4 ports
Both ports sit on top of the black metal housing. Use G1/4 fittings that match your tubing.
Nickel-plated copper cold plate
The flat copper cold plate sits against the processor’s heat spreader. Inside the block, coolant picks up heat as it passes through the jet microchannels.
Key Specifications
| Model | CPU-SP5-SR |
|---|---|
| CPU socket | AMD Socket SP5 (LGA 6096) |
| Cold plate | Nickel-plated T2 copper |
| Coolant path | Jet microchannels |
| Port thread | 2 × G1/4 |
| Dimensions (L × W × H) | 115.30 × 94.71 × 24.00 mm |
| Color | Black |
Which Version Do I Need?
Check your motherboard socket and decide whether you need a block for a custom loop or a complete liquid cooler.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, a radiator, G1/4 fittings, tubing, and coolant.
FAQ
Does this water block fit EPYC 9004 and 9005?
Yes. Both series are supported on AMD Socket SP5 (LGA 6096). Check the socket on your motherboard before ordering.
Will it fit an SP3 EPYC or sTR5 Threadripper motherboard?
No. The mounting hardware on CPU-SP5-SR is for Socket SP5 only.
What fittings does the CPU-SP5-SR use?
Both ports use G1/4 threads. Choose G1/4 fittings that match your tubing.
What else do I need for a custom loop?
You’ll need a pump, a radiator, G1/4 fittings, tubing, and coolant. The motherboard mounting backplate is included with the block.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.









