Bykski
Water Cooling Quick Connector, Bykski CC-UQD8-X Two-Way Shutoff, G1/2 to 5/8 in. ID Hose Barb
Two-way shutoff for liquid cooling lines
The Bykski CC-UQD8-X is a quick connector for server and data center liquid cooling lines. It joins a G1/2 female port to 5/8 in. ID flexible tubing and gives you a service point where you can separate the line by hand. Both halves shut off automatically when separated.
Fits / Use With
Match both ends of the coupling to your loop.
- ✓G1/2 female port for the threaded male plug
- ✓5/8 in. inside-diameter flexible tubing for the barbed female socket
Before ordering, check the port thread, the hose inside diameter, and the space around the socket for moving the sleeve.
Design Highlights
Straight-through flow
Coolant flows through the coupling when the plug and socket are locked together.
Sliding sleeve for hand release
The outer sleeve on the socket operates the lock. Use it to release the plug by hand. Each half closes as the coupling separates.
Pressure drop across the coupling
Bykski’s curve shows about 1.0 bar of pressure drop at 76 L/min.
Key Specifications
| Model | CC-UQD8-X |
|---|---|
| Housing | 316L stainless steel |
| Color | Silver |
| Seal ring | EPDM |
| Spring and ball material | Stainless steel |
| Plug thread | G1/2 male |
| Socket hose barb | 5/8 in. ID flexible tubing |
| Coupled length × max. diameter | 111.19 × 32.00 mm |
| Plug length × height | 59.90 × 29.50 mm |
| Socket length × diameter | 87.00 × 32.00 mm |
| Flow bore | 10 mm |
| Net weight | 277.5 g |
| Maximum working pressure | 20 bar |
| Maximum working flow | 76 L/min |
| Temperature range | −40 to +120 °C |
| Storage temperature | −40 to +150 °C |
| Fluids listed by Bykski | Ethylene glycol, purified water |
| Fluid loss per disconnect | 0.055 mL (manufacturer figure) |
| Durability | 5,000 connection cycles (manufacturer figure) |
Which Version Do I Need?
Choose by the connections on your loop.
What's in the Box
Installation & Use
You’ll need a matching G1/2 female port and 5/8 in. ID flexible tubing.
FAQ
What thread and tubing does the CC-UQD8-X use?
The male plug uses a G1/2 external thread. The female socket has a barb for 5/8 in. ID flexible tubing.
Do both sides close when I disconnect it?
Yes. The plug and socket both shut off automatically when separated. Bykski lists 0.055 mL of fluid loss per disconnect.
Do I need tools to disconnect the two halves?
Once the fitting is installed, you can use the sleeve on the female socket to release the plug by hand.
How long is the assembly when connected?
The coupled assembly is 111.19 mm long, with a maximum outside diameter of 32.00 mm.
- For system design, check the pressure drop at your intended flow, along with the specified coolant, temperature, and pressure limits for your loop.











