Bykski
Push-Lock Hose Quick Connector, Bykski CC-TJ-SR Stainless Steel Union
Push-Lock hose connector with a threaded union
The Bykski CC-TJ-SR is a stainless steel hose fitting for custom liquid cooling loops. It connects compatible Push-Lock hose to a matching metric 24° cone adapter. The hose pushes onto the barb without a separate clamp, and the threaded union nut lets you separate the connection without pulling the hose off the barb.
Fits / Use With
Match both ends to the same row in Key Specifications.
- ✓A male 24° cone adapter with the listed metric thread diameter and pitch
- ✓Flexible Push-Lock hose with the listed nominal inside diameter
Two size options can share a hose ID and use different threads. Check the mating adapter before choosing.
Design Highlights
Push the hose onto the barb
Match the hose's inside diameter to the barb for your chosen size. The Push-Lock connection holds compatible hose without a separate clamp.
Use the union nut to separate the joint
The hex nut threads onto the mating cone adapter. When you undo the nut, the hose can stay on the barb.
Key Specifications
| Model | CC-TJ-SR |
|---|---|
| Body material | SUS304 stainless steel |
| Connection | Straight. Female metric union for a 24° cone adapter to Push-Lock hose barb. |
| Size option | Female thread · nominal hose ID Fitting dimensions A and B in mm |
| 82-6-4 | M12 × 1.5 · 6 mm / 1/4 in A 40 mm · B 8.5 mm |
| 82-8-4 | M14 × 1.5 · 6 mm / 1/4 in A 36 mm · B 10 mm |
| 82-10-6 | M16 × 1.5 · 10 mm / 3/8 in A 40 mm · B 9 mm |
| 82-12-6 | M18 × 1.5 · 10 mm / 3/8 in A 40 mm · B 10 mm |
| 82-15-8 | M22 × 1.5 · 12 mm / 1/2 in A 40 mm · B 11 mm |
| 82-18-10 | M26 × 1.5 · 16 mm / 5/8 in A 44 mm · B 11 mm |
| 82-22-12 | M30 × 2 · 20 mm / 3/4 in A 58 mm · B 12.5 mm |
Which Version Do I Need?
What's in the Box
Installation & Use
Have compatible Push-Lock hose and a matching male 24° cone adapter ready for installation.
FAQ
What makes this a hose quick connector?
The compatible hose pushes straight onto the barb without a separate clamp. The screw-on union nut connects the fitting to the cone adapter.
How do I disconnect the joint?
Shut down and drain the loop before loosening the union nut. Unscrew the nut from the mating adapter. The hose can stay on the barb.
How do I choose between 82-6-4 and 82-8-4?
Both list 6 mm or 1/4 in nominal hose ID. Choose 82-6-4 for M12 × 1.5 or 82-8-4 for M14 × 1.5.
What thread does the CC-TJ-SR use?
The union uses a metric female thread. Check the size table for the diameter and pitch of the option you select.
- If a joint leaks during testing, stop the system and check that the fitting and seal are seated correctly.











