• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

240mm Copper Radiator for PC Water Cooling | Bykski AU-RD240-CU-V3

stars, based on ( 0 ) review
$20.72 piece
items available
Contact Us
FormulaMod Official Store
Bykski · AU-RD240-CU-V3

240 mm copper radiator for custom PC loops

The Bykski AU-RD240-CU-V3 is a 240 mm PC radiator for custom liquid cooling. It fits a 240 mm radiator mount with clearance for its 275 × 124.3 × 30 mm body, fans, and fittings. Copper channels carry coolant through the radiator while fan airflow removes heat through the fins.

Fits
2 × 120 mm fans
Body thickness
30 mm
Coolant channels
Copper
Coolant ports
2 × G1/4

Fan & Case Fit

  • ✓Two 120 mm radiator fans
  • ✓A 240 mm case radiator mount with room for the 275 × 124.3 × 30 mm body

Check your case manual and measure the space at the mount. Allow for fan thickness and the fittings and tubing at the port end.

Design Highlights

Bykski AU-RD240-CU-V3 black radiator in an angled view showing the full fin stack and mounting rails

12 copper coolant channels

Coolant runs through 12 copper channels. Air from the fans passes through the fin stack and carries heat away.

Bykski AU-RD240-CU-V3 close-up of the two threaded ports on one end of the black radiator

Two G1/4 ports at the same end

Both ports face the same way. Leave room at that end for the fittings and tubing bends.

Key Specifications

Model (SKU)AU-RD240-CU-V3
Radiator size class240 mm
Body (L × W × T)275 × 124.3 × 30 mm
Fan mounts2 × 120 mm
Coolant channels12, copper
Coolant ports2 × G1/4
Fan mounting threadM3
Factory stress-test pressure1.5 bar
ColorBlack
Bykski AU-RD240-CU-V3 dimension drawing showing the top and side of the radiator body

Drawing of the radiator body. All measurements are in millimeters.

Which Version Do I Need?

Check the depth available at your 240 mm mount with the fans in place.

Bykski AU-RD240-CU-V3THIS PAGE
Choose this model for a black radiator with a 30 mm body.
Select the black 240 mm RC Series option if your build has room for a 40 mm radiator body.

What's in the Box

1 × black radiatorMounting screws

Installation & Use

1
Flush the radiator before first use to clear any manufacturing residue.
2
Position the radiator and fans in the case. Check the screw length before mounting the fans. A screw may extend at most 5 mm past the radiator-facing surface of a fan. Use the included screws where they meet that limit and select a suitable length for thinner fans or recessed mounting holes.
3
Secure the radiator and fans at the case mount. Connect the radiator to the loop with G1/4 fittings and tubing sized for those fittings.
4
Fill and bleed the loop, then check the connections for leaks before powering the PC.

You also need two 120 mm fans, two G1/4 fittings, and tubing. A typical loop also includes a pump, reservoir, water block, and coolant.

Bykski AU-RD240-CU-V3 installation reference showing a generic cross-section with overlong and correctly sized fan screws

General mounting illustration. On the left the screws reach the core. On the right the screw tips stop short.

FAQ

What are the actual dimensions of this 240 mm radiator?

The body measures 275 mm long, 124.3 mm wide, and 30 mm thick. Allow additional clearance for the fans and fittings.

Is this a copper radiator?

The 12 channels that carry coolant are made of copper.

Are fans included?

Supply two 120 mm fans separately.

What fittings do I need?

Use two G1/4 fittings sized for your tubing. Both ports are at one end of the radiator.

Does the radiator need its own power connection?

The radiator itself has no power connection. The pump circulates coolant, and the fans move air through the radiator.

Notes
  • Purchase note:
    In order to better use and maintain the radiator, please clean the radiator before use, *Please note that it is normal to have a small amount of impurities in the radiator, which are some welding process residues left during manufacturing, etc. *If cleaning is not performed, the first pouring of coolant may cause some color contamination
  • Soldering during manufacture can slightly discolor copper.
  • The manufacturer’s warranty excludes damage caused by screws that puncture the radiator core.

FormulaMod Official Store

Recent Reviews
+