Bykski
RX 9070 XT Water Block for PowerColor Hellhound and Reaper, Bykski A-PC9070XT-X
Full-cover water block for PowerColor RX 9070 XT
The Bykski A-PC9070XT-X is a full-cover GPU water block for supported PowerColor Radeon RX 9070 XT boards. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop. The block includes a black aluminum backplate.
Compatibility
Match your PowerColor card to one of these models.
- ✓PowerColor Hellhound AMD Radeon RX 9070 XT 16GB GDDR6 (RX9070XT 16G-L/OC)
- ✓PowerColor Reaper AMD Radeon RX 9070 XT 16GB GDDR6 (RX9070XT 16G-A)
Before ordering, confirm the full model number and verify the PCB layout and mounting holes on your exact card.
Design Highlights
Full-cover copper cold plate
The copper cold plate draws heat from the GPU core, memory, and voltage regulators. Coolant carries that heat to the radiator in your loop.
ARGB lighting through clear acrylic
The addressable LEDs light up the clear top. Use a matching 5V RBW controller, or use a compatible 5V RBW-to-ARGB adapter cable if the light’s plug differs from your motherboard’s 5V 3-pin ARGB header.
Key Specifications
| Manufacturer model | A-PC9070XT-X |
|---|---|
| Cold plate | T2 copper |
| Copper plate length | 127.52 mm |
| Top | Clear acrylic (PMMA) |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and VRM |
| Jet microchannels | 0.3 mm, up to 50 channels |
| Inlet and outlet thread | G1/4 |
| Water block (L × W × T) | 195.45 × 137.00 × 26.15 mm |
| Backplate (L × W × T) | 195.45 × 106.90 × 5.94 mm |
| Lighting standard | 5V addressable RGB (Bykski RBW) |
| Lighting connection | Matching 5V RBW controller, or a 5V 3-pin ARGB motherboard header with a compatible 5V RBW-to-ARGB adapter cable if the plugs differ. |
Which Version Do I Need?
Start with the graphics card brand and model on your card’s label, then check the PCB.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the rest of the loop, you’ll need a pump, radiator, tubing, G1/4 fittings that match the tubing, and coolant.
FAQ
Does this fit the PowerColor Reaper RX 9070 XT?
Yes. Check for model RX9070XT 16G-A and verify your card’s PCB layout before ordering.
Can I use it as an AIO cooler?
This block is a component for a custom loop. It needs a pump, radiator, tubing, fittings, and coolant.
What fittings does the block use?
Use G1/4 loop fittings sized to your tubing. Use the included stop plugs to seal the unused openings.
How do I connect the lighting?
Use a matching 5V RBW controller. If the light’s plug differs from your motherboard’s 5V 3-pin ARGB header, use a compatible 5V RBW-to-ARGB adapter cable. A 12V 4-pin RGB header can damage the LEDs.
Does the water block come with a backplate?
Yes. The included black aluminum backplate mounts behind the PCB. Coolant flows through the front block.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














