Bykski
60mm Water Cooling Tank, Single-Cap Acrylic Reservoir - Bykski CT-F60-AL-V2
60 mm acrylic reservoir for a threaded pump head
The Bykski CT-F60-AL-V2 is a cylindrical acrylic reservoir for custom PC water cooling. It threads onto the inlet of a compatible pump head, such as the Granzon GFMB, to add coolant capacity. Choose a reservoir length that fits above your pump and leaves room for fittings. The pump is sold separately.
Compatible Pump Heads
Check your exact pump head model before ordering.
- ✓Bykski CP-PA-X
- ✓Bykski CP-RX-X
- ✓Bykski B-NWD5-F60
- ✓Granzon GFMB
The reservoir mounts at the pump inlet. G1/4 refers to the fitting ports in the cap.
Design Highlights

Three G1/4 ports in one cap
The black cap takes G1/4 fittings and plugs. The threaded end of the acrylic tube screws onto the matching pump head.
Four lengths for different clearances
The clear acrylic lets you see the coolant level. The 60 mm version uses a foam insert. The 100, 150, and 200 mm versions have an internal tube.
Key Specifications
| Model | CT-F60-AL-V2 |
|---|---|
| Body | Clear acrylic (PMMA) |
| Tube outer diameter | 60 mm |
| Cap outer diameter | 66 mm |
| Reservoir length | 60, 100, 150, or 200 mm, excluding pump |
| Cap ports | 3 × G1/4 |
Which Version Do I Need?
What's in the Box

The 60 mm version is pictured with ring clips and port plugs.
Installation & Use
You also need a compatible pump, G1/4 fittings, tubing, and coolant.
FAQ
Is the 60 mm water cooling tank 60 mm wide?
The acrylic tube has a 60 mm outer diameter. Allow for the 66 mm diameter of the cap when checking clearance.
Does the reservoir come with a pump?
The pump is sold separately. Use one of the compatible pump heads listed above.
Does the selected length include the pump?
The 60, 100, 150, and 200 mm measurements are for the reservoir alone. Allow extra space for the pump and fittings.
What fittings do the top ports take?
All three cap ports use G1/4 fittings. Seal the ports you leave unused with plugs.












