• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

60mm Water Cooling Tank, Single-Cap Acrylic Reservoir - Bykski CT-F60-AL-V2

stars, based on ( 1 ) reviews
$13.63 piece
items available
Contact Us
FormulaMod Official Store
Bykski · CT-F60-AL-V2

60 mm acrylic reservoir for a threaded pump head

The Bykski CT-F60-AL-V2 is a cylindrical acrylic reservoir for custom PC water cooling. It threads onto the inlet of a compatible pump head, such as the Granzon GFMB, to add coolant capacity. Choose a reservoir length that fits above your pump and leaves room for fittings. The pump is sold separately.

Tube diameter
60 mm
Cap diameter
66 mm
Lengths
60, 100, 150, 200 mm
Fits
Select threaded pump heads

Compatible Pump Heads

Check your exact pump head model before ordering.

  • ✓Bykski CP-PA-X
  • ✓Bykski CP-RX-X
  • ✓Bykski B-NWD5-F60
  • ✓Granzon GFMB

The reservoir mounts at the pump inlet. G1/4 refers to the fitting ports in the cap.

Design Highlights

Bykski CT-F60-AL-V2 angled view showing the three black cap ports and the open pump end

Three G1/4 ports in one cap

The black cap takes G1/4 fittings and plugs. The threaded end of the acrylic tube screws onto the matching pump head.

Bykski CT-F60-AL-V2 clear reservoir tubes in 200 mm, 150 mm, 100 mm and 60 mm lengths

From left to right, 200, 150, 100, and 60 mm.

Four lengths for different clearances

The clear acrylic lets you see the coolant level. The 60 mm version uses a foam insert. The 100, 150, and 200 mm versions have an internal tube.

Key Specifications

ModelCT-F60-AL-V2
BodyClear acrylic (PMMA)
Tube outer diameter60 mm
Cap outer diameter66 mm
Reservoir length60, 100, 150, or 200 mm, excluding pump
Cap ports3 × G1/4
Bykski CT-F60-AL-V2 drawing of the 200 mm reservoir and its 66 mm cap diameter

Manufacturer drawing for the 200 mm version. Dimensions are in millimeters.

Which Version Do I Need?

Bykski CT-F60-AL-V2THIS PAGE
Choose the single-cap kit if you already have a listed pump head and want a reservoir that mounts directly to it.
Choose this dual-cap reservoir if your tubing needs ports at both ends. One cap has three ports and the other has one.
Choose a pump-and-reservoir option if you need both the GFMB pump and this reservoir.

What's in the Box

1 × acrylic reservoir with capMounting hardware
Bykski CT-F60-AL-V2 60 mm reservoir with foam insert, ring clips, plugs, and mounting hardware

The 60 mm version is pictured with ring clips and port plugs.

Installation & Use

1
Choose a mounting location with room for the reservoir, pump, and fittings.
2
Seat the seal and thread the open end of the reservoir onto the inlet of your compatible pump head.
3
Secure the assembly at a suitable mounting point.
4
Connect the tubing with G1/4 fittings and plug any unused ports.
5
Fill the loop with compatible coolant and check for leaks before powering the PC electronics.

You also need a compatible pump, G1/4 fittings, tubing, and coolant.

Bykski CT-F60-AL-V2 installation example showing a CP-PA-X pump on its own and with the reservoir attached

Bykski CP-PA-X shown before and after attaching the reservoir. The pump is sold separately.

FAQ

Is the 60 mm water cooling tank 60 mm wide?

The acrylic tube has a 60 mm outer diameter. Allow for the 66 mm diameter of the cap when checking clearance.

Does the reservoir come with a pump?

The pump is sold separately. Use one of the compatible pump heads listed above.

Does the selected length include the pump?

The 60, 100, 150, and 200 mm measurements are for the reservoir alone. Allow extra space for the pump and fittings.

What fittings do the top ports take?

All three cap ports use G1/4 fittings. Seal the ports you leave unused with plugs.

Product Gallery

Bykski CT-F60-AL-V2 short reservoir with foam insert, clear ring clips, port plugs, and fasteners
Bykski CT-F60-AL-V2 four reservoir lengths viewed from their open threaded ends
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+