Bykski
60mm Water Cooling Tank – Bykski CT-4H60-AL, 80/130/180/240mm
60 mm cylinder reservoir for custom PC loops
The Bykski CT-4H60-AL reservoir stores coolant for a separate pump in a custom PC water cooling loop. Its clear acrylic tube lets you check the coolant level at a glance. Connect it with G1/4 fittings and choose an overall length that leaves room in your case for tubing and filling.
Compatibility
Use G1/4 fittings to plumb the reservoir into your loop. For direct mounting, Bykski lists these pump heads.
- ✓Bykski B-NWD5-F60
- ✓Bykski CP-PMD3COV-X
- ✓Bykski CP-RX-X
Check the exact pump head and revision before ordering. Bykski's direct-mount example for the CP-PMD3COV-X shows a clear threaded top.
Design Highlights
Four lengths to match your case clearance
The length option includes both end caps. Measure the space at your mounting location and leave extra room for fittings, tubing bends, and access to fill the tank.
Removable end caps
Both caps come off for cleaning. Each end has a sealing ring, and the clear guide tube extends into the reservoir from the three-port cap.
Key Specifications
| Model | CT-4H60-AL |
|---|---|
| Reservoir body | Clear acrylic |
| End caps | Black, removable |
| Tube outside diameter | 60 mm |
| End cap outside diameter | 66 mm |
| Overall length, caps installed | 80, 130, 180, or 240 mm |
| Port thread | G1/4 |
| Port layout | Three on one cap, one on the other |
Which Version Do I Need?
What's in the Box
Installation & Use
You also need a pump, G1/4 fittings, matching tubing, and coolant. A complete loop also needs a radiator and water blocks for the components you plan to cool.
FAQ
What does 60 mm measure?
It is the outside diameter of the acrylic tube. The end caps are 66 mm across, and the selected overall length includes both caps.
Does the reservoir come with a pump?
The box contains the reservoir and its mounting hardware and plugs. Supply your own pump for the loop.
How many ports does it have?
One end cap has three ports and the opposite cap has one. The ports use G1/4 fittings.
Can I remove the end caps for cleaning?
Yes. Both end caps can be removed to reach the inside of the reservoir.












