Bykski
G1/4 Rotary Offset Fitting for Water Cooling — Bykski CC-HR-X / CC-HR-10/15/20/25-X
stars, based on ( 0 ) review
FormulaMod Official Store


Bykski · CC-HR Series
G1/4 rotary offset fitting for water cooling
The Bykski CC-HR series shifts a connection sideways in a custom PC water-cooling loop. Use it when a hard tube and the port it needs to reach are out of line. The CNC-machined brass body swivels through 360° so you can point the offset toward the tube.
Fits
G1/4 loop connections
Rotation
360°
Body
CNC-machined brass
Use with
- ✓A G1/4 female port on the loop component
- ✓A tubing fitting with a G1/4 male thread on the offset side
Key Specifications
| Models | CC-HR-X, CC-HR-10-X, CC-HR-15-X, CC-HR-20-X, CC-HR-25-X |
|---|---|
| Offset by model | CC-HR-10-X · 10 mm CC-HR-15-X · 15 mm CC-HR-20-X · 20 mm CC-HR-25-X · 25 mm |
| Threads | G1/4 male to G1/4 female |
| Swivel range | 360° |
| Body | CNC-machined brass |
| Seal | Rubber O-ring |
| Colors | Black or silver |
CC-HR-15-X close-up

Female thread

Male thread and swivel collar
What's in the Box
1 × rotary offset fitting in the selected model and color
FAQ
Which model gives a 15 mm offset?
Choose CC-HR-15-X for a 15 mm sideways shift.
Does the offset fitting connect directly to tubing?
Use a separate tubing fitting with a G1/4 male thread at the adapter’s female end.
Notes
- Measure the sideways gap between the tube and port centerlines before selecting an offset.







