• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

STAR1 Round PC Case for Custom Water Cooling, Barrowch FBCES-PA

stars, based on ( 0 ) review
€293.48 piece
items available
Contact Us
FormulaMod Official Store
Barrowch · STAR1 · FBCES-PA

Round open-frame PC case for custom water cooling

The Barrowch STAR1 FBCES-PA is a round, open-frame PC case for a custom water-cooled build. Its clear acrylic chassis routes coolant through built-in channels and holds it in an integrated reservoir. It fits ATX motherboards and has two rear mounts for 360 mm radiators, with the motherboard and coolant tubing visible from the front.

Fits
ATX, microATX, Mini-ITX
Rear mounts
2 × 360 mm radiators
Acrylic
10 mm panel
Colors
Silver or black

Compatibility

Motherboard and cooling fit

  • ✓Motherboards: ATX, microATX, and Mini-ITX
  • ✓Radiators: up to two 360 mm units at the rear
  • ✓Graphics card: direct motherboard mounting, or vertical mounting with a separately purchased GPU mounting module
  • ✓Distro plate pump: Barrow SPB17-T PLUS, sold separately

Check room for your graphics card, power supply, radiator fittings, and tubing before ordering.

Design Highlights

Barrowch FBCES-PA STAR1 silver showcase build with a vertical graphics card, white tubing, and an illuminated acrylic rim

Manufacturer build example. The PC hardware and loop components shown are separate purchases.

Acrylic body with integrated coolant routing

The coolant channels are built into the round acrylic body, with the reservoir chamber on the right. An included ARGB strip lights the rim on both colors.

Barrowch FBCES-PA STAR1 installation drawing showing two stacked rear radiators with three fans on each

Manufacturer drawing of the rear radiator layout.

Two rear radiator mounts

Two rear brackets let you mount a pair of 360 mm radiators. The brackets carry the radiator and fan assemblies behind the main acrylic panel.

Key Specifications

ModelBarrowch STAR1 FBCES-PA
Case typeCircular open-frame PC chassis
Body10 mm acrylic panel with sheet-metal components
BaseAluminum
Dimensions (H × W × D)559 × 520 × 225.40 mm, including base
Net weight4.5 kg
StorageOne mechanical hard drive mount at the base
LightingIncluded ring-shaped ARGB strip with a 5V 3-pin connector
SilverFBCES-PA-SL
BlackFBCES-PA-BK
Barrowch FBCES-PA STAR1 front and side dimension drawing with height, width, and depth marked in millimeters

Manufacturer drawing. Dimensions are in millimeters.

What's in the Box

1 × Barrowch STAR1 FBCES-PA chassis with integrated distro plate, reservoir, and ring-shaped ARGB strip

Choose the silver or black chassis. PC hardware, the pump, radiators, fans, and other external loop parts are purchased separately.

Barrowch FBCES-PA STAR1 bare case with a clear circular distro plate, metal mounts, and a black base

Bare chassis shown in black.

Installation & Use

1
Fit the power button into the case bracket, screw the bracket to the base, and fasten the circular body to the bracket.
2
Fit the motherboard standoffs and washers and secure the board and graphics card using the mounting arrangement you chose. Attach the power supply to its bracket.
3
Secure the radiators and fans to the rear brackets, then attach the brackets to the chassis.
4
Fit the pump and water blocks, then connect the tubing between those components, the radiators, and the integrated distro plate.

For a complete build, supply your own PC hardware, pump, radiators, fans, water blocks, fittings, tubing, and coolant.

Barrowch FBCES-PA STAR1 assembly drawing showing screws that secure the lower acrylic body to the base bracket

Manufacturer drawing of the chassis-to-base attachment.

FAQ

Does the STAR1 include a complete water-cooling kit?

Both the silver and black chassis include built-in coolant channels, a reservoir, and a ring-shaped ARGB strip with a 5V 3-pin connector. The pump, radiators, fans, and other external loop parts are separate purchases.

What motherboard sizes fit this round PC case?

The STAR1 takes ATX, microATX, and Mini-ITX motherboards.

Can I install two 360 mm radiators at the same time?

Yes. One 360 mm radiator mounts to each of the two rear brackets.

Can I mount my graphics card vertically?

Yes. The separately sold FBACEXL-02 module holds the card parallel to the motherboard with its face pointing outward. In the standard layout, the card plugs directly into the motherboard.

Which pump does Barrow show for the STAR1?

Barrow lists the SPB17-T PLUS through-hole pump for the STAR1 distro plate. It is purchased separately.

Build Gallery

Barrowch FBCES-PA STAR1 front view of the silver build with white tubing
Barrowch FBCES-PA STAR1 front view of the bare chassis with a clear acrylic panel and black base
Barrowch FBCES-PA STAR1 rear view with two rows of illuminated radiator fans and the power supply
Barrowch FBCES-PA STAR1 silver build with the graphics card mounted vertically in front of the motherboard
Barrowch FBCES-PA STAR1 black build with blue coolant in the reservoir on a white background
Barrowch FBCES-PA STAR1 black build with a blue liquid loop and horizontally mounted graphics card
Barrowch FBCES-PA STAR1 front build view with white tubing, a silver base, and a lit acrylic rim
Barrowch FBCES-PA STAR1 front build view with the black base, blue channels, and exposed motherboard
Notes
  • Please contact us for a shipping quote.

FormulaMod Official Store

Recent Reviews
+