• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

DDR5 RAM Cooler with 4 PWM Fans, Barrowch FBRAMFD

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Barrowch · FBRAMFD

Active air cooling for desktop DDR5 RAM

The Barrowch FBRAMFD is an active RAM cooler for desktop DDR5 memory fitted with Barrowch FBRAMLD-01 heat spreaders. Four PWM fans direct air over the heat spreaders to carry heat away from the memory. Choose the fan module on its own or pair it with two or four heat spreaders.

Fits
DDR5 with FBRAMLD-01
Fans
4 × PWM
Fan speed
8,000 RPM
Connector
4-pin PWM

Compatibility

Use with desktop DDR5 DIMMs fitted with Barrowch FBRAMLD-01 heat spreaders.

  • ✓One heat spreader per DIMM
  • ✓One 4-pin PWM fan header on the motherboard

Check the space above and around your DIMM slots before ordering.

Barrowch FBRAMFD compatible FBRAMLD-01 DDR5 heat spreaders showing their top mounting holes

Design Highlights

Barrowch FBRAMFD black fan module showing its four fans and two top-cover screws

Four fans on one PWM header

The fans sit in an aluminum alloy housing and direct airflow over the memory. The motherboard controls their speed through a single PWM connection.

Barrowch FBRAMFD white four-fan module mounted above black FBRAMLD-01 DIMM heat spreaders

Screw-on mounting

The fan base screws into the matching heat spreaders. The removable top cover gives you access to the mounting points.

Key Specifications

ModelFBRAMFD
CoolingFour PWM fans
Fan speed8,000 RPM, PWM adjustable
Motherboard connection4-pin PWM fan header
Fan housingAluminum alloy
Fan module dimensions138 × 42 × 18 mm (L × W × H)
Fan module colorsBlack or white
Matching heat spreaderFBRAMLD-01, black aluminum alloy
Heat spreader dimensions134 × 32 × 7.9 mm (L × H × T)
Spreader hole spacing113 mm inner pair, 123 mm outer pair
Barrowch FBRAMFD fan module and FBRAMLD-01 heat spreader dimension drawings, including mounting-hole spacing

Manufacturer drawing. Fan module above, heat spreader below. Dimensions are in millimeters.

Which Version Do I Need?

The FBRAMFD air cooler and FBRWB-PA4 water block both pair with FBRAMLD-01 heat spreaders.

Barrowch FBRAMFD Active RAM CoolerTHIS PAGE
Choose the fan module to add airflow over your DIMMs. Pick a kit if you also need heat spreaders.
Choose this single-DIMM heat spreader if you already have the fan module and need a matching spreader.
Choose this TFT-equipped water block for a custom liquid loop with two to four DIMMs.

What's in the Box

Fan module only (1 × FBRAMFD)Kit A (1 × FBRAMFD + 2 × heat spreaders)Kit B (1 × FBRAMFD + 4 × heat spreaders)

Choose black or white for the fan module in any configuration. Kit heat spreaders are black.

Installation & Use

1
Shut down the PC and remove the DIMMs. Follow your memory manufacturer's instructions to remove any existing heat spreaders.
2
Place thermal pads over the memory chips. Fit the heat spreader around each DIMM, tighten its screws, and seat the DIMMs in the motherboard.
3
Remove the two screws from the fan module's top cover. Lift off the cover, align the fan base with the heat spreaders, and secure it through the matching holes.
4
Refit the top cover and tighten its two screws. Align the keyed plug with the module’s socket, then connect the other end to a 4-pin PWM fan header.

For the fan-module-only option, have a matching FBRAMLD-01 heat spreader for each DIMM you plan to cool.

Barrowch FBRAMFD exploded view showing the top cover, fan base, mounting screws, and DIMM heat spreaders

Manufacturer illustration. The fan base mounts to the heat spreaders, and the top cover screws onto the base.

FAQ

Does this RAM cooler come in white?

Yes. The fan module comes in white or black, including in Kit A and Kit B. The heat spreaders are black.

What does the ‘Just RAM block’ option include?

This option contains one FBRAMFD fan module. Choose Kit A or Kit B if you also need heat spreaders.

Should I choose Kit A or Kit B?

Choose Kit A if you need two heat spreaders or Kit B if you need four. Each DIMM uses one heat spreader.

Does this RAM cooler use a liquid loop?

It uses four PWM fans for air cooling and connects to a 4-pin PWM fan header on the motherboard.

Notes
  • Barrowch may change the cooler’s appearance or construction without prior notice.

FormulaMod Official Store

Recent Reviews
+