• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

DDC Pump Heatsink and Top Kit – Barrowch FBDCHK

stars, based on ( 1 ) reviews
€43.76 piece
items available
Contact Us
FormulaMod Official Store
Barrowch · FBDCHK

DDC pump heatsink and top kit

The Barrowch FBDCHK gives an existing DDC pump core an aluminum housing, a finned heatsink base, and a clear acrylic top for a custom liquid cooling loop. The top has three G1/4 ports, with two outlet positions to help route tubing. Bring your own compatible pump core.

Fits
Barrow 17W PWM / DRIVEDDC-32
Ports
3 × G1/4
Lighting
LRC 2.0
Finish
Black or silver

Compatible DDC Pump Cores

  • ✓Barrow 17W PWM DDC pump cores
  • ✓DRIVEDDC-32 pump core

Check the model of your pump core before ordering.

Key Specifications

ModelFBDCHK
MaterialsAluminum alloy housing and heatsink base, clear acrylic top
Dimensions74.5 × 74.5 × 56 mm
Port threadG1/4
Port layoutOne inlet and two outlets
LightingBarrow LRC 2.0
FinishBlack or silver

What's in the Box

1 × FBDCHK kit5V 3-pin ARGB motherboard adapter cable

The kit contains the housing, finned heatsink base, and clear acrylic top. Bring your own compatible pump core. Supply any mounting bracket or lighting controller you plan to use.

Installation & Use

1
Barrow 17W PWM DDC. Align the pump’s power connection with the housing notch and seat the sealing ring in the housing. Choose the outlet position and align the acrylic top. Match the notch on the heatsink base to the housing notch and secure the base with screws.
2
DRIVEDDC-32. Remove the rear cover screws and lift out the pump core. Fit the core into the housing, aligning it with the notch, then fasten the heatsink base with screws.
3
Optional mounting. Fasten the matching Barrow bracket to the bottom or side mounting holes.

FAQ

Does the kit include a DDC pump?

Bring your own compatible DDC pump core. Both finishes ship without a lighting controller.

Which port is the inlet?

The center port on the acrylic top is the inlet. The other top port and the side port are outlets.

Can I control the lighting from my motherboard?

Use the included adapter cable to connect the pump top lighting to a 5V 3-pin ARGB header on your motherboard. A Barrow LRC 2.0 controller is another option.

Notes
  • When connecting the included lighting adapter, match its orientation to the pins on the 5V ARGB header.
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+