• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

Barrow Distro Plate DC17-SDB with Pump for 120/240/360 mm Vertical Radiator Mounts

stars, based on ( 0 ) review
$110.53 piece
items available
Contact Us
FormulaMod Official Store
Barrow · DC17-SDB

Universal distro plate with an integrated pump and reservoir

The Barrow DC17-SDB is a universal distro plate for custom PC water cooling. It uses a matching vertical radiator mount in the case and combines an acrylic reservoir, a factory-installed 17 W pump, and G1/4 ports. The plate gives you one place to route coolant between the radiator and your water blocks. Plan a separate mount for the radiator.

Fits
120 / 240 / 360 mm vertical radiator mounts
Pump
17 W, preinstalled
Ports
G1/4
Lighting
5V ARGB

Case Mounting Compatibility

Choose the plate that matches a free vertical radiator mount in your case.

  • ✓120 mm plate → 120 mm vertical mount
  • ✓240 mm plate → 240 mm vertical mount
  • ✓360 mm plate → 360 mm vertical mount

Compare your case’s screw holes with the M4 mounting pattern in Installation & Use. Allow room for the plate, pump, and connected fittings, and keep a separate mount free for the radiator.

Barrow DC17-SDB mounted vertically at the right of a white PC case, with tubing routed to the water blocks and radiators

Barrow’s example shows the plate mounted vertically, with radiators in separate positions.

Design Highlights

Barrow DC17-SDB angled view of the black aluminum front panel, clear acrylic reservoir, and mounted pump

Pump and reservoir on one plate

The pump ships mounted to the plate. The clear acrylic chamber holds coolant and lets you see the level through the aluminum front panel’s opening.

Barrow DC17-SDB showing purple and blue ARGB lighting along the acrylic edge and reservoir window

5V addressable lighting

The built-in LEDs illuminate the clear acrylic. Use a compatible Barrow LRC 2.0 controller or the appropriate sync cable for a 5V 3-pin ARGB motherboard header.

Key Specifications

ModelDC17-SDB
120 mm version120 × 120 × 57.20 mm
240 mm version240 × 120 × 57.20 mm
360 mm version360 × 120 × 57.20 mm
ConstructionClear acrylic chamber, CNC-machined aluminum alloy front panel
Coolant port threadG1/4
Rear mountingM4, 105 × 105 mm fan hole pattern
PumpFactory-installed 17 W pump
Lighting5V ARGB (3-pin at the motherboard)
FinishBlack or white front panel
Barrow DC17-SDB drawing comparing all three plate lengths and showing the side profile with pump installed

Barrow dimensions in millimeters. The side view includes the pump protrusion.

Which Version Do I Need?

Check your case’s mounting space and decide whether you want a preinstalled pump.

Barrow DC17-SDBTHIS PAGE
Choose this plate if you want a preinstalled pump. Each size comes in black or white.
Compare this series if you want to order a radiator-mount distro plate without a pump. It also offers a pump option.

What's in the Box

1 × distro plate with preinstalled 17 W pumpMounting screws

Installation & Use

1
Match the holes on the vertical radiator mount to the rear drawing. Start the M4 screws and leave the plate slightly loose for tubing alignment.
2
Use the fourth image in the product gallery to identify the ports for your plate size and connect the radiator and water blocks. Fit the tubing and close unused openings with stop plugs. Tighten the mounting screws once the tubing is in place.

On the 120 mm version, the top pair is for radiator return (left) and filling or venting (right). The left column, from top to bottom, goes to the radiator, from the water block, to the water block, and to the drain. The same water block ports serve either a CPU or a GPU block.

The 240 mm version has separate pairs for CPU and GPU blocks. The 360 mm version adds alternate GPU connections. For one GPU on the 360 mm version, Barrow recommends port ① to the GPU block and port ④ for the return. All three versions have radiator, fill and vent, and drain connections.
3
With the PC off, match the pump’s power connector to the correct power supply lead.
4
For motherboard lighting, use a compatible sync cable and align the adapter’s arrow with the marked 5V pin on the motherboard’s 3-pin ARGB header. For a compatible Barrow LRC 2.0 controller, use the matching 3-pin end and follow the controller’s port instructions.
5
Add coolant through the fill port before starting the pump. Keep the pump supplied with coolant and leak-test the loop with only the pump powered before you turn on the PC.

You also need a radiator, water blocks for the components you’re cooling, tubing, G1/4 fittings that match the tubing, and coolant.

Barrow DC17-SDB rear mounting drawing with red circles around the screw holes for all three sizes

Red circles mark the M4 mounting holes. The drawing shows the 360, 240, and 120 mm plates from left to right.

FAQ

How do I know whether this universal distro plate fits my case?

Match the plate’s size and rear screw pattern to a free vertical radiator mount. Check the clearance with the pump and fittings in place, and reserve a separate spot for the radiator.

Does the 120 mm distro plate come with a pump?

Yes. The 120, 240, and 360 mm versions on this page all come with a factory-installed 17 W pump.

What fittings does the DC17-SDB use?

The coolant ports take G1/4 fittings. Choose fittings that also match the tubing you plan to run.

Where do I connect the lighting?

Use the appropriate sync cable for a 5V 3-pin ARGB motherboard header or a compatible Barrow LRC 2.0 controller.

Can I fill and drain the loop through the plate?

Yes. All three versions have a port for filling and venting and a separate drain port.

Notes
  • The selected distro plate includes its preinstalled pump. Any additional pumps, radiators, reservoirs, cases, fittings, and other equipment shown in the detail photos are for reference only.
  • Product Upgrade Note:
    As Barrow upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
    If not notified in time, the Barrow's latest real object shall prevail.

FormulaMod Official Store

Recent Reviews
+