• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

Barrow Mini Pump & Reservoir Combo, 17W PWM (SPB17-TM)

stars, based on ( 1 ) reviews
$71.75 piece
items available
Contact Us
FormulaMod Official Store
Barrow · SPB17-TM

17W mini pump and reservoir combo for custom loops

The Barrow SPB17-TM combines a 17W pump and a mini reservoir for custom PC liquid cooling loops with G1/4 fittings. The 80 mm tall assembly puts the coolant supply directly above the pump for compact builds. Adjust the pump speed from the motherboard with PWM or use the manual speed knob.

Fits
G1/4 loop fittings
Pump power
17W rated
Body height
80 mm
Speed control
PWM or manual

Fittings, Clearance & Connections

Check the fittings, wiring, and space in your build.

  • ✓G1/4 fittings sized for your tubing
  • ✓Separate 12V DC pump power and a 4-pin motherboard PWM header for automatic speed control
  • ✓A compatible 5V 3-pin ARGB motherboard header for use with the included lighting adapter cable

Allow space above and beside the pump for fittings, tubing, and access when filling the reservoir. Keep the pump inlet facing up so coolant can feed it by gravity.

Design Highlights

Barrow SPB17-TM cutaway illustration showing coolant flow through the pump cavity

Barrow’s pump cavity illustration.

The reservoir feeds the pump from above

The clear acrylic reservoir sits directly above the pump. The aluminum alloy housing uses fins to dissipate heat from the pump electronics.

Barrow SPB17-TM manual speed knob and its attached cable

Control speed from the motherboard or by hand

The pump ships in PWM mode. Turn the knob clockwise to switch to manual control, or turn it all the way counterclockwise to return to PWM.

Key Specifications

ModelBarrow SPB17-TM
Housing colorsBlack or silver
Reservoir and pump housingAcrylic reservoir, finned aluminum alloy pump housing
Body height80 mm
Unit weight380 g
Port threadG1/4
Port layoutThree inlets and one outlet
Rated pump power17 W
Rated pump voltage12V DC
Rated current1.4 A
Pump control4-pin motherboard PWM or manual knob
Maximum speed4,000 RPM
Maximum flow rate960 L/h
Maximum head5–6 m
LightingBarrow LRC 2.0 5V ARGB
Barrow-listed temperature limitBelow 60 °C
Barrow-listed noiseBelow 40 dB
Barrow-listed service lifeOver 50,000 hours
Barrow SPB17-TM dimension drawing showing the 80 mm body height, two top inlets and the lower side outlet.

The body is 80 mm tall. The arrows mark G1/4 threaded ports.

Which Version Do I Need?

Match the model to how you plan to mount and feed the pump.

Barrow SPB17-TMTHIS PAGE
Choose this for a 17W pump with its own mini reservoir.
Choose this if you want a 10W pump with a built-in mini reservoir.
Choose this through-hole 17W pump if your distro plate calls for the SPB17-T V2.

What's in the Box

1 × SPB17-TM pump and mini reservoir assembly5V 3-pin ARGB motherboard adapter cable

A standalone lighting controller is sold separately.

Installation & Use

1
Mount the assembly upright with the reservoir above the pump. Leave room to reach the top ports during filling.
2
Connect the loop return to one of the two top inlets or the upper side inlet. Connect the pump discharge to the lower side outlet. Cap unused ports with G1/4 plugs.
3
Connect the pump’s separate 12V power lead. For automatic speed control, connect the 4-pin PWM lead to the motherboard and leave the knob in PWM mode.
4
Fill the reservoir before applying power to the pump. Keep coolant feeding the pump during filling and leak-test with the other PC components powered off.
5
For motherboard lighting control, use the included lighting adapter cable only with a compatible 5V 3-pin ARGB header.

To complete the loop, you’ll also need your water block or blocks, radiator, tubing, matching G1/4 fittings, plugs for unused ports, and coolant.

FAQ

Does the Barrow SPB17-TM come with a reservoir?

Yes. The mini reservoir and 17W pump form one assembly.

How do I switch between manual speed and PWM?

Turn the speed knob clockwise to enter manual mode. Turn it fully counterclockwise to return to motherboard PWM control.

Which side port is the outlet?

The outlet is the lower side port, near the pump housing. The upper side port and both top ports are inlets.

What do I need to control the lighting?

Use the included lighting adapter cable with a compatible 5V 3-pin ARGB motherboard header. A standalone LRC 2.0 lighting controller is sold separately.

Finishes & Port Views

Barrow SPB17-TM black pump and clear reservoir viewed from the lower outlet side

Black housing, outlet side

Barrow SPB17-TM silver pump housing under the clear reservoir with the outlet facing forward

Silver housing, outlet side

Barrow SPB17-TM black pump and reservoir viewed from the upper side inlet and two top inlets

Black housing, inlet side

Barrow SPB17-TM black pump housing with the clear reservoir illuminated in multiple colors

LRC 2.0 lighting

Notes
  • Product appearance structure will be upgraded without a prior notice, and the material object prevails.
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+