• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

10x16mm Soft Tubing for Water Cooling, Clear PU, 1 m | Barrow RGTP-H

stars, based on ( 0 ) review
$2.89 piece
items available
Contact Us
FormulaMod Official Store
Barrow · RGTP-H

Clear soft tubing for custom PC water cooling

The Barrow RGTP-H is clear polyurethane (PU) tubing that carries coolant between components in a custom PC water cooling loop. It comes in 1-meter pieces and fits 10x16mm soft-tube compression fittings. Cut each run to the length you need for your case. The clear walls let you see the coolant inside.

Nominal size
10 × 16 mm ID × OD
Material
Clear polyurethane
Length
1 m per piece
Fits
Soft-tube compression fittings

Fits / Use With

Use compression fittings sized for 10 × 16 mm soft tubing.

  • ✓Barrow THKN-3/8-V4 fits this nominal tube size and has a G1/4 thread on the component side.

Not compatible:

  • ✗16 mm OD hard-tube fittings

Match both diameters on the fitting label. Look for 10 × 16 mm (ID × OD) or 3/8 in ID × 5/8 in OD, and make sure the fitting is for soft tubing.

Design Highlights

Barrow RGTP-H clear polyurethane tubing in a coil with both cut ends visible

Flexible tubing for routing around components

Measure each run inside your case and cut it to length. Leave enough room for the tubing to curve without kinking.

Barrow RGTP-H clear tubing seated in a black soft-tube compression fitting

Barrow installation example. The fitting is sold separately.

A compression collar secures the tube end

A square cut helps the tube seat evenly on the fitting. The collar compresses the tube wall against the barb.

Key Specifications

ModelRGTP-H
MaterialPolyurethane (PU)
ColorClear
Nominal size (ID × OD)10 × 16 mm (3/8 in × 5/8 in)
Barrow drawing (ID × OD)9.50 × 15.90 mm
Length per piece1 m
Tubing temperature resistance−20 to 90 °C (Barrow specification)
Barrow RGTP-H cross-section drawing labeled 9.50 mm inner diameter and 15.90 mm outer diameter

Barrow cross-section drawing. Dimensions are in millimeters.

Which Version Do I Need?

Both options below have a nominal size of 10 × 16 mm. Choose the tube material you want for your loop.

Barrow RGTP-HTHIS PAGE
Choose this clear polyurethane tube for individual 1 m pieces.
Choose the clear 10 × 16 mm option if you want PVC tubing.

What's in the Box

1 × 1 m clear RGTP-H soft tube

Compression fittings are sold separately.

Barrow RGTP-H coiled soft tubing with the circular opening facing right

Installation & Use

1
Lay out and measure each run between fittings. Route the tube so it can curve without twisting or kinking.
2
Cut each end square with a tubing cutter.
3
Slide the compression collar onto the tube with its threads facing the fitting. Push the tube all the way onto the barb, then tighten the collar.
4
Leak-test the completed loop before powering on the PC.

Have matching soft-tube compression fittings, a tubing cutter, and coolant for your loop on hand.

FAQ

What do the 10 and 16 in 10x16mm mean?

They’re the nominal inner and outer diameters, respectively. Barrow’s drawing lists 9.50 mm ID and 15.90 mm OD.

What is the tubing made of?

It’s made of clear polyurethane (PU).

Does any G1/4 fitting fit this tubing?

Choose a G1/4 compression fitting specifically sized for 10 × 16 mm soft tubing, such as Barrow THKN-3/8-V4. The G1/4 thread connects the fitting to the component.

If I order three pieces, will I get one 3 m tube?

You’ll receive three separate 1 m pieces.

Notes
  • In case of product appearance structure upgrade, without further notice, in kind prevail.

FormulaMod Official Store

Recent Reviews
+