Barrow
Barrow Motherboard Lighting Adapter Cable
Sync Barrow Aurora lighting with your motherboard
The specifications, compatibility, and wiring instructions below apply to the Adapter cable option (Barrow ZBDZJX-5M). This standard adapter connects a matching Barrow LRC 2.0 Aurora lighting lead to a 5V 3-pin motherboard ARGB header. Once connected, the motherboard can apply its lighting effects to the Barrow component.
Compatibility for the Adapter Cable
Check the connectors on both sides before ordering.
- ✓Lighting side: Barrow LRC 2.0 Aurora 5V lighting with the matching plug
- ✓Motherboard side: matching 5V 3-pin ARGB headers on ASUS, MSI, and ASRock boards
Not compatible:
- ✗12V 4-pin RGB headers and motherboard fan headers
Barrow’s product instructions exclude Gigabyte motherboards for this adapter.
Check your motherboard manual for the +5V, data, and ground positions and make sure the missing pin lines up with the blocked position on the plug.
Design Highlights
Two ends for a direct connection
On the standard adapter, the shrouded end connects to the Barrow lighting lead. The arrow-marked end plugs into your motherboard’s matching ARGB header.
Line up the molded arrow with the motherboard header’s +5V pin before inserting the plug.
Key Specifications for the Adapter Cable
| Model (standard adapter) | Barrow ZBDZJX-5M |
|---|---|
| Motherboard connector | 5V 3-pin ARGB female, with one blocked position |
| Lighting connector | Barrow LRC 2.0 Aurora 5V, shrouded 3-pin |
| Standard wire length | 100 mm (10 cm) |
| Standard cable color | Black |
Which Version Do I Need?
For manual lighting control, see the Barrow ARSKZQ manual controller and select “5v Manual controller” on that product page.
What's in the Box
Installation & Use for the Adapter Cable
You’ll need a motherboard with the matching ARGB header and a Barrow LRC 2.0 Aurora lighting component with the matching plug.
FAQ
What type of connector does the standard adapter use?
On the Adapter cable option (Barrow ZBDZJX-5M), the motherboard end is a 5V 3-pin ARGB female connector. The other end has a shrouded 3-pin connector for the matching Barrow LRC 2.0 Aurora lighting lead.
Can I plug the standard adapter into a 12V RGB header?
Use a matching 5V 3-pin ARGB header. A 12V 4-pin RGB header uses a different voltage and pin layout.
How long is the standard adapter?
Barrow specifies a wire length of 100 mm (10 cm) for the standard ZBDZJX-5M.
Do I need a separate lighting controller with the standard adapter?
The standard adapter connects the lighting lead to a compatible motherboard header directly. The motherboard controls the lighting in that setup.
- In case of product appearance structure upgrade,without further notice,in kind prevail









