• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

CPU or GPU Radiator Loop Kit, 240/360 mm | Barrow GCI-T / Barrowch CPI-T Series

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Barrow / Barrowch · GCI-T & CPI-T Series

Modular water cooling loop kit for a CPU or GPU

This Barrow and Barrowch kit is for building a soft-tube liquid cooling loop around one Intel or AMD CPU or a GPU with a matching water block. A 240 or 360 mm radiator houses the pump, reservoir, and fans in one assembly. Each kit supplies the selected water block and the tubing and fittings to connect it.

Fits
Select Intel, AMD, or GPU hardware
Radiator
240 or 360 mm
Pump
17 W, integrated
Ports
G1/4

Compatibility

Match the water block to your hardware and check the radiator clearance.

Not compatible:

  • ✗AMD Ryzen Threadripper with the AMD CPU option

Intel CPU option (CPI-T / CPIE-T). Barrow lists LGA115x, LGA1200, X99, and X299 for the original Intel block.

AMD CPU option (CPAI-T / CPAIE-T). Barrowch lists AM4 in its original CPU kit documentation.

CPU options. Before ordering, send FormulaMod your exact motherboard model to confirm the mounting hardware supplied with your kit.

GPU options. Before ordering, give FormulaMod your card brand, full model number, and PCB revision so the matching water block and, for double-sided cooling, active backplate can be confirmed.

Case clearance. Verify the full assembly dimensions in the table, including space at the pump end and room to route the tubing.

Design Highlights

Barrow DARIDP-30 240 exploded view showing two fans, the radiator, side panels, and pump and reservoir components

Manufacturer illustration of the 240 mm assembly.

Pump, reservoir, radiator, and fans in one assembly

Mount the DARIDP-30 as one unit. The pump supports PWM or manual speed adjustment, and the radiator has dedicated fill ports.

Barrow GCI-T2 example showing a GPU fitted with an active backplate and connected by two hoses to a two-fan radiator

Manufacturer assembly example with the GCI-T2. Confirm the block and backplate for your exact card before ordering.

Choose GPU cooling for one side or both

The single-sided option cools the component side of the card. The double-sided option adds an active water-cooled backplate for a matching PCB.

Barrowch CPI-T series installation drawing of a CPU water block connected by soft tubing to a two-fan radiator assembly

Manufacturer drawing of a CPU loop with a 240 mm radiator.

CPU options by socket

The Intel and AMD CPU options come with an HDMI display water block for their respective platforms. Choose by motherboard socket.

Key Specifications

240 mm assemblyDARIDP-30 240 · 309.10 × 124 × 65.30 mm · 2 × 120 mm fans
360 mm assemblyDARIDP-30 360 · 429.10 × 124 × 65.30 mm · 3 × 120 mm fans
Radiator materialCopper radiator core
Pump12 V DC, 17 W · PWM or manual speed control
Pump connections4-pin peripheral Molex power and separate 4-pin PWM signal
Rated pump maxima960 L/h flow · 5–6 m head
Radiator connectionsG1/4 inlet and outlet · dedicated fill ports
Fan connectorBarrow 6-pin PWM, connects to the fan and lighting controller
Lighting syncBarrow LRC 2.0 via 5 V 3-pin motherboard ARGB
GPU single-sided SKU240 mm GCI-T1
360 mm GCIE-T1
GPU double-sided SKU240 mm GCI-T2
360 mm GCIE-T2
Intel CPU SKU240 mm CPI-T
360 mm CPIE-T
AMD CPU SKU240 mm CPAI-T
360 mm CPAIE-T

Which Version Do I Need?

Barrow / Barrowch CPU or GPU loop kitTHIS PAGE
Choose this kit to get the selected water block, integrated radiator assembly, tubing, and fittings together.
Choose the stand-alone pump, radiator, and fan assembly if you are supplying your own water block and tubing.

What's in the Box

1 × pump, reservoir, and radiator assembly with fans1 × selected CPU or GPU water block2 × silicone soft tubes4 × soft-tube compression fittings2 × 90° fittings1 × air leak tester1 × fan and lighting controller

GPU options include thermal pads. Acrylic-top full-cover gaming GPU blocks include 2 × G1/4 stop plugs. If the matched GPU block has a metal top or its top material is unconfirmed, supply your own G1/4 stop plugs for any unused ports.

Supply your own PC loop coolant.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Barrow GCI-T1 packing illustration showing the air leak tester, fan and lighting controller, elbow fittings, and soft-tube compression fittings

Installation & Use

1
Check the case clearance and mount the radiator assembly. Flush the radiator before first use using a radiator cleaner.
2
Power off the system and remove the stock cooler. Install the chosen block with your own thermal paste. On a GPU, follow the instructions for the exact block and PCB when placing the included thermal pads and mounting the block.
3
Connect the block and radiator inlet and outlet with the soft tubing and compression fittings. Follow the port markings and tighten the compression rings.
4
Connect pump power and the separate PWM lead. Plug the radiator fans into the kit controller and use a 5 V 3-pin ARGB motherboard header if you want lighting sync.
5
Air-test the assembled loop before filling. Add coolant through a fill port and keep the pump supplied with coolant during priming. Check for leaks before powering the rest of the PC.

Have PC loop coolant, radiator cleaner, and thermal paste on hand. Follow the instructions for your selected block and leak tester.

FAQ

Does one kit cool both the CPU and GPU?

Choose one CPU or GPU water block when you configure the kit. Each kit includes the selected block.

How do I choose a GPU block?

Provide your card brand, full model, and PCB revision before ordering. Confirm the matching block and, for the double-sided option, the active backplate.

What radiator size do I need?

Pick the version your case can accommodate. Check the full 309.10 or 429.10 mm assembly length, the 124 mm width and 65.30 mm thickness, and space for the tubing.

Does the pump come with the radiator?

Yes. The 17 W pump, reservoir, radiator, and fans come as one assembly.

Does the kit ship with coolant?

Supply your own PC loop coolant and fill the loop after an air leak test.

Notes
  • Barrow reserves the right to upgrades products or adjusts the contents of the kit. If in the future such as product updates version, model or appearance, adjustments to the kit list, etc., if not notified in time, the Barrow's latest real object and the newest list shall prevail.
  • The factors of artificial damage (large-scale collapse of wave plates, water leakage caused by water channels being pierced by screws, etc.) are not within the scope of warranty.
  • In case of upgrading to the appearance and structure , no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+