• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

MSI RTX 5090 D Suprim & Vanguard Water Block | Barrow BS-MSP5090-PA

stars, based on ( 0 ) review
€115.70 piece
items available
Contact Us
FormulaMod Official Store
Barrow Aurora · BS-MSP5090-PA

Full-cover water block for MSI RTX 5090 D Suprim and Vanguard

The Barrow Aurora BS-MSP5090-PA is a full-cover GPU water block for the MSI GeForce RTX 5090 D 32G Suprim, Suprim Liquid, and Vanguard models listed below. It replaces the factory cooler so a custom liquid cooling loop can remove heat from the GPU core, memory, and power delivery components.

Fits
Select MSI RTX 5090 D 32G cards
Ports
G1/4
Lighting
5V 3-pin ARGB
Backplate
Black or white aluminum

Compatibility

Barrow lists these MSI cards for BS-MSP5090-PA.

  • ✓MSI GeForce RTX 5090 D 32G Vanguard SOC Launch Edition
  • ✓MSI GeForce RTX 5090 D 32G Vanguard SOC
  • ✓MSI GeForce RTX 5090 D 32G Vanguard OC
  • ✓MSI GeForce RTX 5090 D 32G Suprim Liquid SOC
  • ✓MSI GeForce RTX 5090 D 32G Suprim Liquid OC
  • ✓MSI GeForce RTX 5090 D 32G Suprim SOC
  • ✓MSI GeForce RTX 5090 D 32G Suprim OC

Before ordering, verify the exact model and PCB layout against Barrow’s compatibility information.

MSI GeForce RTX 5090 D 32G Suprim SOC front fan view for Barrow BS-MSP5090-PA compatibility

MSI’s GeForce RTX 5090 D 32G Suprim SOC, one of the listed cards.

Design Highlights

Barrow BS-MSP5090-PA angled view of the clear acrylic top, cold plate, and port terminal

Clear acrylic over a copper cold plate

The clear acrylic top lets you see the coolant path over the copper cold plate.

Parallel microchannel fins in a design illustration from the Barrow BS-MSP5090-PA guide

Barrow’s microchannel illustration.

Microchannels over the GPU

Coolant flows through closely spaced channels in the cold plate over the GPU core.

Barrow BS-MSP5090-PA rear views with a white backplate above a black backplate

Black or white backplate

A passive aluminum backplate mounts behind the PCB. The Black (-BK) and White (-WT) options pair the same clear top with the selected backplate color.

Key Specifications

ModelBS-MSP5090-PA
Cold plateCopper
TopClear acrylic
Cooling coverageGPU core, memory, and power delivery
BackplatePassive aluminum alloy, black or white
Inlet and outlet threadG1/4
Overall dimensions (L × W × max T)219.80 × 156.70 × 24.20 mm
LightingBarrow LRC2.0, 5V 3-pin ARGB
Barrow BS-MSP5090-PA dimension drawing with face and side views of the water block

Barrow’s dimensions in millimeters.

Which Version Do I Need?

Check the full MSI card name before choosing between these Aurora blocks.

Barrow BS-MSP5090-PATHIS PAGE
Choose this block for a listed Suprim, Suprim Liquid, or Vanguard PCB.
Choose the Ventus block for MSI GeForce RTX 5090 D 32G Ventus 3X or Ventus 3X OC.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate in the selected color2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC, remove the graphics card, and take off the factory cooling assembly. Clean away the old thermal materials.
2
Identify and cut the pads using Barrow’s installation diagram for your block, then place them as shown. Apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate, then secure them with the supplied screws and washers.
4
Check the inlet and outlet positions before connecting the G1/4 fittings. Seal unused ports with the included stop plugs.
5
Leak-test the loop before powering the graphics card.

For the loop, supply a pump, reservoir, radiator, coolant, G1/4 fittings, and matching tubing.

Barrow BS-MSP5090-PA thermal pad placement diagram with three numbered pad groups

Thermal pad placement. Check Barrow’s installation diagram for your block to identify the pads before cutting them.

FAQ

Is this a universal GPU water block?

It is shaped for the MSI RTX 5090 D 32G PCB layouts in the compatibility list above. Confirm your exact card model and PCB before ordering.

Does this block include a backplate?

Yes. It comes with a passive aluminum backplate in the color you select.

How do I connect the ARGB lighting?

For motherboard control, use a separately purchased LRC2.0-compatible adapter and align it with the 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the lighting.

What fittings do I need?

Use G1/4 fittings that match your tubing. Purchase the compression fittings separately.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+