Barrow
Server Integrated Pump Box, Barrow SPB17-TP 17W with Reservoir and Manual/PWM Control
Integrated pump and reservoir for server liquid cooling loops
The Barrow SPB17-TP combines a 17W water pump and a reservoir in one factory-assembled unit for custom server liquid cooling loops. The reservoir sits inside the POM pump cover to save space. You can adjust pump speed with the manual knob or let a motherboard PWM header control it.
Loop Connections
Use G1/4 fittings that match the tubing in your custom loop.
Check the enclosure against Barrow’s dimension drawing. Leave room above the fill port and beside the pump for fittings and tubing.
Design Highlights
Reservoir built into the pump cover
The POM cover holds coolant in the same assembly as the pump. The finned aluminum alloy housing helps the pump shed heat.
Two ways to set pump speed
The pump ships in PWM mode. Use the motherboard PWM header for automatic speed control, or turn the knob clockwise to switch to manual control.
Key Specifications
| Model | SPB17-TP |
|---|---|
| Color | Black |
| Overall size (L × W × H) | 80 × 62.2 × 70 mm |
| Base mounting hole spacing | 35 × 27 mm |
| Port thread | G1/4 |
| Rated electrical input | 12 V DC, 1.4 A, 17 W |
| Maximum flow | 960 L/h |
| Maximum head (Barrow spec) | 5–6 m |
| Maximum speed | 4,000 RPM |
| Drive | Sine wave |
| Materials | Aluminum alloy housing, POM pump cover, ceramic shaft |
| Weight | 380 g |
| Noise (Barrow spec) | <40 dB |
Which Version Do I Need?
What's in the Box
Installation & Use
For the rest of the loop, you’ll need G1/4 fittings, matching tubing, coolant, a radiator, and the appropriate water blocks.
FAQ
Do I need a separate reservoir or pump cover?
The SPB17-TP comes assembled with a reservoir built into the pump cover.
How do I switch between manual and PWM speed control?
Turn the knob clockwise to enter manual mode. Turn it fully counterclockwise to return to motherboard PWM control.
What flow rate and head does Barrow list?
Barrow lists a maximum flow rate of 960 L/h and a maximum head specification of 5–6 m.
Which port should I use to fill the pump?
Use the top G1/4 fill port. Connect your loop tubing to the side inlet and outlet shown in the port diagram.
- In case product appearance upgrade, without further notice, prevail in kind.












