Barrow
MSI RTX 4080 16GB Suprim / Gaming Trio Water Block with Backplate - Barrow BS-MSG4080M-PA
Full-cover GPU water block for MSI GeForce RTX 4080
The Barrow BS-MSG4080M-PA is a full-cover GPU water block for the MSI GeForce RTX 4080 16GB SUPRIM and GAMING TRIO PCB layouts listed below. It replaces the stock cooler and transfers heat from the GPU core, memory, and VRM into a custom liquid cooling loop. An aluminum backplate mounts behind the PCB.
Compatibility
Barrow lists these four MSI graphics cards for this block.
- ✓MSI GeForce RTX 4080 16GB SUPRIM X
- ✓MSI GeForce RTX 4080 16GB SUPRIM
- ✓MSI GeForce RTX 4080 16GB GAMING X TRIO
- ✓MSI GeForce RTX 4080 16GB GAMING TRIO
Barrow’s SUPRIM X PCB photo shows a board marked MS-V511 VER:2.0. Before ordering, verify your exact card model and PCB layout.
Design Highlights
Full-cover copper cold plate
Coolant flows through 43 microchannels over the GPU core. The copper cold plate also draws heat from the memory and voltage regulators through thermal pads.
Clear acrylic top with addressable lighting
The clear acrylic top leaves the coolant path visible. Run the Barrow LRC 2.0 lighting from a compatible controller or sync it to a 5V 3-pin motherboard ARGB header with a matching adapter cable.
Aluminum backplate in black or white
The included passive backplate mounts behind the PCB. Select a black or white backplate when choosing the block.
Key Specifications
| Model | BS-MSG4080M-PA |
|---|---|
| Cold plate | CNC-machined copper |
| Top | Clear acrylic |
| Microchannels | 43 channels, 0.5 mm groove width, 0.3 mm spacing |
| Water block dimensions (L × W × T) | 260.40 × 152.10 × 23.80 mm |
| Inlet and outlet thread | G1/4 |
| Backplate | Passive aluminum alloy, black or white |
| Lighting | Barrow LRC 2.0, 5V 3-pin ARGB |
Which Version Do I Need?
Match the block to the graphics card’s exact PCB.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.
FAQ
Is this a universal RTX 4080 water block?
Barrow lists four specific MSI RTX 4080 16GB boards for this block. Match both the card model and its PCB to the compatibility list before ordering.
Can I connect the lighting to my motherboard?
Use a matching sync adapter cable and a 5V 3-pin ARGB header. You can also use a compatible LRC 2.0 controller.
What fittings do I need for tubing?
Use G1/4 loop fittings that match the tubing you plan to use. The included stop plugs seal unused openings.
Can I choose the backplate color?
Select a black or white aluminum backplate. Each water block comes with one backplate in the finish you select.
- 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.













