Barrow
G1/4 Manual Exhaust Valve for PC Water Cooling – Barrow TPQ-V2
Manual air evacuation valve for PC water cooling
The Barrow TPQ-V2 is a manual air evacuation valve for custom PC water cooling loops. It screws into a spare G1/4 female port high in the loop, such as at the top of the reservoir. Press the front button to vent trapped air while filling and bleeding the loop and equalize pressure with the surrounding air.
Fits / Use With
Use a spare G1/4 female port at a high point where air collects, such as the top of the reservoir.
Keep the front button accessible.
Design Highlights
Press the front button to vent air
Once the valve is installed, press the front button to let air out through the fitting. The valve stays threaded into the port during use.
Textured grip and separate color choices
The diamond-knurled body gives your fingers a grip as you thread the valve into place. Choose the body and the CD-pattern face colors in the product options.
Key Specifications
| Model | TPQ-V2 |
|---|---|
| Valve type | Manual push-button air vent |
| Materials | Brass and aluminum alloy |
| Mounting thread | G1/4 male |
| Body diameter | 20 mm |
| Body height | 10.50 mm excluding the thread |
| Threaded section | 5 mm |
Which Version Do I Need?
What's in the Box
Installation & Use
FAQ
How do I let air out without removing the valve?
Leave the fitting threaded into the port and press the front button. Check that the valve is closed when you finish.
Where should I install the valve?
Use a spare G1/4 female port at a high point where air collects, such as the top of the reservoir.
How much room does the valve body take up?
The body is 20 mm across and 10.50 mm high. The threaded section adds 5 mm below the body.
Is it made of brass?
Barrow lists brass and aluminum alloy for the valve.
- In case of product appearance structure upgrade,without further notice,in kind prevail










