• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

Barrow D5 Pump SPG40A-X, 18W PWM, G1/4 Ports, Aluminum Housing

stars, based on ( 1 ) reviews
items available
Contact Us
FormulaMod Official Store
Barrow · SPG40A-X

18W PWM pump for custom PC water cooling

The Barrow SPG40A-X is an 18W D5-style pump that circulates coolant in a custom PC water cooling loop. Its included pump top accepts G1/4 fittings, and a full aluminum alloy housing helps draw heat away from the pump electronics. The pump runs on 12V DC and uses a separate motherboard PWM connection for speed control.

Fits
G1/4 loop fittings
Rated power
18 W at 12 V DC
Max. flow
1,260 L/h
Max. head
4 m

Fits & Connections

  • ✓G1/4 fittings for the loop connections
  • ✓4-pin peripheral power from the power supply
  • ✓4-pin PWM header on the motherboard for speed control

Check the pump’s 78.50 mm diameter and 99 mm height against the space available in your build. Allow room for fittings and tubing.

Design Highlights

Barrow SPG40A-X complete pump with a clear acrylic top, three visible ports, and a black housing

Pump top and housing included

The pump comes with a G1/4 top. Choose clear acrylic, black POM, or white POM, then select a black, blue, red, silver, or white housing.

Barrow SPG40A-X rear close-up of the CNC aluminum alloy housing around the pump motor

Full aluminum alloy housing

The CNC-machined housing surrounds the motor and helps dissipate heat from the pump electronics.

Key Specifications

ModelSPG40A-X
Pump typeD5-style permanent-magnet centrifugal pump
Rated supply12 V DC, 1.5 A
Rated power18 W
Power connector4-pin peripheral (Molex-style)
Speed controlSeparate 4-pin motherboard PWM connector
Maximum speed4,800 RPM
Maximum flow1,260 L/h
Maximum head4 m
Port threadG1/4
Pump topClear acrylic (PMMA), black POM, or white POM
Pump housingCNC-machined aluminum alloy
Dimensions (diameter × height)78.50 × 99 mm
Weight240 g
Ingress protectionIP54

Which Version Do I Need?

SPG40A-X Standalone PumpTHIS PAGE
Choose this pump if you already have a reservoir or want to select one separately.
Choose the SPG40A-X option in this bundle to get the acrylic-top pump with a 90, 130, or 210 mm YKD5G65 reservoir.
Choose this listing if you only need the cylinder reservoir used in the SPG40A pump bundle.

What's in the Box

1 × SPG40A-X pump assembly

The assembly includes the pump core, the selected pump top, and the selected aluminum alloy housing. The reservoir is sold separately.

Installation & Use

1
Disconnect power to the PC. Identify the two inlets and the outlet before connecting tubing. The outlet is on the side opposite the pump-top holder groove.
2
Mount the pump with the inlet you plan to use facing up so the reservoir can feed it by gravity. Connect the loop with G1/4 fittings and seal the unused inlet with a G1/4 stop plug.
3
With power off, connect the pump’s 4-pin peripheral power lead to the power supply and its separate PWM lead to the motherboard’s 4-pin PWM header before running the pump.
4
Fill the reservoir and let coolant flow into the pump by gravity. Make sure the pump is full before powering it. Never run the pump dry.
5
Leak-test the filled loop with the other PC components unpowered. Top up the reservoir as the coolant level drops. Start the PC only after the loop passes the leak test and all hardware is dry. Then set the header to PWM mode in BIOS.

For the rest of the loop, you’ll need a reservoir, tubing, G1/4 fittings and a stop plug, coolant, a radiator, and a water block.

FAQ

What are the dimensions of the pump?

The pump measures 78.50 mm across and 99 mm high.

Does the SPG40A-X come with a reservoir?

This listing includes the pump assembly with its top and housing. The SPG40A-X option in the pump and reservoir bundle adds a YKD5G65 tank.

How do I power the pump and control its speed?

The 4-pin peripheral connector supplies 12V DC from your power supply. The separate 4-pin PWM connector goes to your motherboard for speed control.

Which ports are the inlet and outlet?

The center port and one side port are inlets. The side port opposite the holder groove is the outlet. All three ports use G1/4 threads.

Notes
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+