• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

10x16mm Soft Tube Compression Fitting, G1/4 — Barrow THKN-3/8-V4

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Barrow · THKN-3/8-V4

10 × 16 mm Soft Tube Compression Fitting

The Barrow THKN-3/8-V4 is a straight fitting that connects 10 × 16 mm soft tubing to a female G1/4 port in a custom PC water-cooling loop. The compression collar tightens around the tube to hold it on the barb, and an O-ring seals the connection at the port.

Fits
10 mm ID × 16 mm OD soft tubing
Port thread
G1/4 male
Material
H59 brass
Pack size
1 fitting

Fits / Use With

  • ✓10 × 16 mm soft tubing (3/8 in ID × 5/8 in OD)
  • ✓Female G1/4 ports on PC water-cooling components

Check both tube diameters before ordering. Barrow makes a separate fitting for 10 × 13 mm soft tubing.

Design Highlights

Cutaway view of the Barrow THKN-3/8-V4 fitting showing the brass cross-section

Barb and compression collar

The soft tube pushes over the inner barb. The outer collar threads down over the tube to compress the wall against the barb.

Barrow THKN-3/8-V4 close-up of the diamond knurling on the compression collar

Diamond-knurled grip

The diamond texture gives your fingers a grip when you tighten or remove the collar by hand.

Key Specifications

ModelTHKN-3/8-V4
Fitting typeStraight soft tube compression
Tube inner diameter (ID)10 mm (3/8 in nominal)
Tube outer diameter (OD)16 mm (5/8 in nominal)
Port threadG1/4 male
Thread length5 mm
MaterialH59 brass
ColorsBlack, White, Silver, Gold, White Silver
Barrow THKN-3/8-V4 manufacturer drawing of the straight fitting showing the port end and textured collar

Which Version Do I Need?

Match the tubing size first, then choose singles or a set.

10 × 16 mm single fittingTHIS PAGE
Choose THKN-3/8-V4 for soft tubing with a 16 mm outer diameter.
Choose THKN-3/8-B03 for soft tubing with a 13 mm outer diameter.
Choose a set when you need several fittings of the same size. Select 10 × 16 mm (V4) or 10 × 13 mm (B03).

What's in the Box

1 × Barrow THKN-3/8-V4 compression fitting

Installation & Use

1
Screw the fitting body into the female G1/4 port so the O-ring seats against the port face.
2
Unscrew the compression collar and slide it onto the soft tube with the threaded side facing the fitting.
3
Push the tube fully onto the barb. Bring the collar back down and tighten it onto the fitting by hand.
4
Leak-test the assembled loop before powering on the PC hardware.

Have 10 × 16 mm soft tubing and a component with a female G1/4 port ready.

Barrow THKN-3/8-V4 port-side view showing the male threads and the O-ring at their base

The O-ring sits at the base of the port thread.

FAQ

Does the Barrow 10x16mm fitting take 3/8 in × 5/8 in tubing?

Yes. For this fitting, 3/8 in is the nominal inner diameter and 5/8 in is the nominal outer diameter of the soft tubing.

Which fitting should I use with 10 × 13 mm soft tubing?

Choose the Barrow THKN-3/8-B03 for 10 × 13 mm soft tubing. It takes the same nominal inner diameter as the V4 but a smaller outer diameter.

Can I use 16 mm rigid tubing with this fitting?

Use 10 × 16 mm soft tubing with this fitting. For 16 mm rigid tubing, choose a fitting designed for rigid tubing.

How many fittings come in one unit?

This listing is for one THKN-3/8-V4 fitting.

Notes
  • Note: In case of product appearance structure upgrade,without further notice,in kind prevail

FormulaMod Official Store

Recent Reviews
+