Bykski RGV-Antec-TE — Antec Torque Distro Plate

Bykski RGV-Antec-TE — Distro Plate for Antec Torque Case

Quick answer: Bykski RGV-Antec-TE is a custom-engineered acrylic distro plate (also known as a waterway board) for the Antec Torque Case. Replaces traditional soft-tube routing inside the chassis with a single front-facing acrylic waterway. Designed for single-GPU loops with Intel CPU water block. Lighting: RBW 5v 3pin 12V 4pin RGB.

Why this distro plate fits Antec

Antec performance and showcase chassis benefit from the visual cleanliness a distro plate provides — no bend artifacts, no asymmetric tube routing, just a single engineered waterway visible through the case window.

Manufacturer notes (from original spec)

Please pay attention to this product is only compatible with corresponding case, may not be compatible with other cases. Waterway Board only compatible suitable for single GPU building 6.

Specifications

• SKU: RGV-Antec-TE
• Brand: Bykski
• Material: acrylic
• Compatible case: Antec Torque Case
• Loop topology: single-GPU
• CPU platform: Intel CPU
• Lighting: RBW 5v 3pin 12V 4pin RGB
• Notes from original spec: 5v 3pin; 12v 4pin; 5V

Compatibility notes (inherited from original spec)

The following references appear in the original product specification and are preserved here for reference. Distro plates do not directly interface with motherboards — verify your specific build configuration before relying on these mentions.

• Brand mentions in original spec: Intel
• Related part: B-PMD3-COV
• Related part: B-PMD3-X

What it replaces

Traditional soft-tube routing inside the Antec Torque Case. The waterway is pre-engineered into the acrylic plate — no bend work needed. The result is a clean front-panel showcase loop with a fixed, predictable flow path.

FAQ

Is "distro plate" the same as "waterway board"?

Yes — same product category. "Distro plate" is the term widely used in the international PC water-cooling community; "waterway board" is the original manufacturer term. You may see both used interchangeably.

Does it come with a pump, fittings, or coolant?

No. The plate ships as the acrylic distro plate only. Pump, G1/4 fittings, soft tube (or hard tube), and coolant are sold separately.

What lighting headers does it support?

RBW 5v 3pin 12V 4pin RGB. Plug into the matching motherboard header — no separate controller required for the supported header type.

Will this fit other versions of the Antec?

This plate is engineered specifically for the Antec Torque Case. Different revisions of the same chassis line may have different mounting points; verify your case version before ordering.

Last updated: 2026-05