Bykski RGV-PHA-NV7-P Distro Plate Combo for Phanteks NV7, PMMA Waterway Board with DDC Pump and Armor, 5V A-RGB, G1/4

Bykski RGV-PHA-NV7-P Distro Plate Combo for Phanteks NV7, PMMA Waterway Board with DDC Pump and Armor, 5V A-RGB, G1/4

TL;DR: This RGV-PHA-NV7-P configuration combines the PMMA acrylic waterway board for the Phanteks NV7 with a DDC-class pump in aluminum armor. The pump runs on 10-15V DC, draws power from a standard 4-pin Molex with PWM control on a 4-pin header, reaches 5000 RPM and delivers approximately 600 LPH (132...

Common Applications

This RGV-PHA-NV7-P configuration combines the PMMA acrylic waterway board for the Phanteks NV7 with a DDC-class pump in aluminum armor. The pump runs on 10-15V DC, draws power from a standard 4-pin Molex with PWM control on a 4-pin header, reaches 5000 RPM and delivers approximately 600 LPH (132 GPH). MTBF is rated 50,000 hours. A 5V 3-pin Addressable RGB (RBW) light strip is integrated behind the channels and all ports use G1/4 threads.

Frequently Asked Questions

Q: What does this combo include?

A: The PMMA waterway board for the Phanteks NV7, a DDC pump with aluminum armor, a 5V A-RGB RBW LED strip and complete mounting hardware.

Q: What are the DDC pump specs?

A: 10-15V DC, 4-pin Molex power, 4-pin PWM control, up to 5000 RPM, approximately 600 LPH (132 GPH) max discharge and 50,000 hour MTBF.

Q: What is the waterway material and what coolant restrictions apply?

A: PMMA acrylic. Never use coolants containing alcohol or aggressive solvents with PMMA or stress cracks will form.

Q: Can I drive RGB from a motherboard 12V header?

A: No. The light strip is 5V 3-pin Addressable RGB. A 12V 4-pin RGB header will destroy the LEDs.

Q: Does this work with aluminum radiators?

A: The board itself supports aluminum and non-aluminum loops, but mixing aluminum with copper or nickel in the same loop will cause galvanic corrosion.