Bykski N-GV3090AORUS-X Full Coverage GPU Block + Backplate for Gigabyte AORUS RTX 3080/3090 Master (Rev 1.0 only), G1/4

Bykski N-GV3090AORUS-X Full Coverage GPU Block + Backplate for Gigabyte AORUS RTX 3080/3090 Master (Rev 1.0 only), G1/4

TL;DR: This full coverage block targets the GPU core, graphics memory (RAM), and voltage regulator modules (VRM) on the Gigabyte AORUS RTX 3080/3090 Master (Revision 1.0 only). The block uses electroplated high purity copper with clear acrylic, paired with a black anodized aluminum backplate that is not in

The Bykski Full Coverage GPU Water Block for Gigabyte AORUS RTX 3080/3090 Master is a work of art! This full coverage block directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

Features

• Finest Craftsmanship
• Designed to Fit Standard G1/4 Thread Fittings
• SLI/Crossfire Compliant

Specifications

• Model: N-GV3090AORUS-X
• Brand: Bykski
• Block Material: Electroplated High Purity Copper / Clear Acrylic
• Backplate Material: Black Anodized Aluminum (not in contact with coolant)

Compatibility

• (Including but not limited to the following models)
• Gigabyte AORUS GeForce RTX 3090 MASTER 24G (Revision 1.0 only)
• Gigabyte AORUS GeForce RTX 3080 MASTER 10G (Revision 1.0 only)
• Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
• Compatibility based on these circuit board designs only
• Fittings: G 1/4in. Thread
• Stock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.

Parts Included

• 1x Full Coverage GPU Water Block
• 1x Backplate
• 2x Stop Fitting
• 1x Mounting Hardware
• Thermal grease
• 1x 5v A-RGB (RBW) Light
• (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.

Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.

Not responsible for any damage caused by or when using this product. Please use at your own risk.

Common Applications

This full coverage block targets the GPU core, graphics memory (RAM), and voltage regulator modules (VRM) on the Gigabyte AORUS RTX 3080/3090 Master (Revision 1.0 only). The block uses electroplated high purity copper with clear acrylic, paired with a black anodized aluminum backplate that is not in contact with coolant. Designed to fit standard G 1/4 thread fittings, the block is SLI/Crossfire compliant and supports multi-block series configurations through top and bottom ports.

Frequently Asked Questions

Q: Will this block fit any Gigabyte AORUS RTX 3080 or 3090 Master?

A: No. It only fits Revision 1.0 of the Gigabyte AORUS GeForce RTX 3090 MASTER 24G and the AORUS GeForce RTX 3080 MASTER 10G. Other revisions are not guaranteed to be compatible.

Q: Is the original AORUS Master backplate compatible after installing the block?

A: Not guaranteed. Due to mounting variances between cards, the stock backplate is not guaranteed to fit with the block installed.

Q: Can two of these blocks be used in SLI?

A: Yes, the block is listed as SLI/Crossfire compliant, and the top and bottom ports allow parallel or serial multi-block setups.

Q: What thread are the fittings?

A: Designed to fit standard G 1/4 thread fittings, which are the industry standard across most PC water cooling components.