Aigo OctaveSpace C3 120mm RGB Fan 3-Pack with Controller, 1500 RPM, 38 CFM

Aigo OctaveSpace C3 120mm RGB Fan 3-Pack with Controller, 1500 RPM, 38 CFM

TL;DR: Each OctaveSpace C3 kit contains three 120 x 120 x 25mm RGB fans plus an inline controller that drives both color effects and fan speed. The fans run on a 12V supply with separate 5V power for the LED rings, spin at 1500 RPM at rated speed, deliver about 38 CFM each, and stay around 23.5 dBA. Five...

Common Applications

Each OctaveSpace C3 kit contains three 120 x 120 x 25mm RGB fans plus an inline controller that drives both color effects and fan speed. The fans run on a 12V supply with separate 5V power for the LED rings, spin at 1500 RPM at rated speed, deliver about 38 CFM each, and stay around 23.5 dBA. Five lighting rings on each rotor produce layered color animations across a 240mm or 360mm radiator face. A hydro bearing carries a 20,000-hour service life, and eight silicone shock pads per fan damp vibration into the radiator frame and chassis. One controller can drive up to ten fans, so a second kit can be daisy-chained for a full push-pull configuration.

Frequently Asked Questions

Q: How many fans are in one kit?

A: Each OctaveSpace C3 kit contains three 120mm fans plus the lighting and speed controller.

Q: What are the rated speed, airflow, and noise?

A: 1500 RPM (plus or minus 10%), about 38 CFM per fan, and roughly 23.5 dBA. Rated power per fan is 4.2W at 12V.

Q: What radiator sizes are supported?

A: The 120 x 120 x 25mm form factor fits any radiator using the standard 120mm fan pitch, including 120, 240, and 360mm radiators.

Q: How many fans can the controller drive?

A: Up to ten RGB fans, so a second three-pack can be added without a second controller.

Q: Are these motherboard-syncable?

A: They are designed around the bundled controller for color and speed. They do not natively connect to a motherboard 5V 3-pin ARGB header without the controller in the chain.