Bykski
4x8-Pin to 12VHPWR GPU Power Adapter Cable, 450 mm, FormulaMod Fm-48124P
4x PCIe 8-pin to 12VHPWR GPU power adapter
The FormulaMod Fm-48124P is a 450 mm sleeved adapter cable for graphics cards with a 16-pin (12+4) 12VHPWR input that allow this adapter setup. It links four separate PCIe 8-pin GPU power leads to one straight plug at the graphics card. Included cable combs keep the sleeved wires aligned as you route the cable.
Compatibility
Check both ends before ordering.
- ✓Graphics card with a 16-pin (12+4) 12VHPWR input and manufacturer approval for this adapter setup.
- ✓Power supply with four separate original PCIe 8-pin GPU power leads and enough capacity for your graphics card.
GeForce RTX 40 Series Founders Edition and GeForce RTX 3090 Ti Founders Edition cards require the NVIDIA adapter supplied with the card when using PCIe 8-pin leads.
Use the GPU ends of your original PCIe power leads only. Keep CPU/EPS cables and PSU modular sockets out of this connection.
Design Highlights
Four sockets for four GPU power leads
Each female PCIe 8-pin socket takes the graphics-card plug from a separate original PSU lead. The straight 12VHPWR plug goes into the graphics card.
Tinned copper under nylon sleeving
FormulaMod specifies 16 AWG tinned copper. The cable combs keep the nylon-sleeved wires lined up along the visible run.
Key Specifications
| Model family | FormulaMod Fm-48124P |
|---|---|
| Cable length | 450 mm (17.7 in) |
| GPU connector | 1 × straight 16-pin (12+4) 12VHPWR male plug |
| PCIe inputs | 4 × PCIe 8-pin female sockets |
| Wire gauge | 16 AWG |
| Conductor | Tinned copper |
| Sleeving | Nylon braid |
| Black connectors | Black, white, red, pink, blue, sky blue, gray, or green cable |
| White connectors | White, pink, sky blue, or green cable |
Which Version Do I Need?
Match the adapter to the power connection specified by your graphics card and power supply manufacturers.
What's in the Box
Installation & Use
You will need four separate PCIe GPU power leads supplied with your power supply.
FAQ
How many PCIe cables does this 4x8 adapter need?
Use four separate PCIe GPU power leads from your PSU. Plug one 8-pin connector from each lead into the adapter.
Can I plug the 8-pin end into my modular PSU?
The four sockets connect to the GPU ends of your original PCIe power leads. Use the PSU’s original cables at the modular sockets.
How long is the adapter cable?
The cable is 450 mm (17.7 in) long.
Are cable combs included?
Yes. The adapter cable comes with cable combs.











