• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

2x 8-Pin to 12VHPWR Adapter Cable – FormulaMod Fm-28124P, 450 mm, with Combs

stars, based on ( 0 ) review
$12.35 piece
items available
Contact Us
FormulaMod Official Store
FormulaMod · Fm-28124P

Dual 8-pin PCIe to 12VHPWR adapter with cable combs

The FormulaMod Fm-28124P is a 450 mm GPU power adapter for graphics cards that accept a 16-pin 12VHPWR plug and whose manufacturer allows a dual 8-pin adapter. Its two female PCIe sockets connect to separate graphics card power cables from your power supply. The nylon sleeving and included combs keep the wires together as you route them through the case.

GPU plug
16-pin (12+4) 12VHPWR
PCIe inputs
2 × 8-pin female
Length
450 mm (17.7 in)
Power wire
16 AWG

Compatibility

Check your exact graphics card’s power instructions before ordering.

  • ✓The card must have a 16-pin 12VHPWR power socket and its manufacturer must allow a third-party dual 8-pin adapter.
  • ✓Use two separate PCIe graphics card power cables supplied for your power supply.

Not compatible:

  • ✗Older 12-pin-only GPU power sockets or CPU/EPS connectors.
  • ✗Direct connection to a modular power supply port.

NVIDIA specifies the original in-box adapter for PCIe 8-pin conversion on the GeForce RTX 4070, 4080, 4090, 5070, 5080, and 5090 Founders Edition cards.

Design Highlights

FormulaMod Fm-28124P black sleeved adapter with two PCIe 8-pin sockets, one straight 12VHPWR plug, and a clear cable comb

Two PCIe sockets and one GPU plug

The two 8-pin sockets face your existing PCIe power cables. The straight 16-pin plug at the other end connects to the graphics card.

FormulaMod Fm-28124P series wire illustration showing the stranded conductor, insulation, and outer sleeving

Manufacturer’s wire construction illustration.

Nylon sleeving and 16 AWG power wires

The power wires use insulated tinned copper under a nylon braid. The included combs keep the sleeved wires in parallel along the run.

Key Specifications

ModelFm-28124P
Cable length450 mm (approx. 17.7 in)
GPU connectorStraight 16-pin (12+4) 12VHPWR male
Cable-side connectors2 × PCIe 8-pin female
Power wire gauge16 AWG
ConductorTinned copper
Outer sleevingNylon braid

Which Version Do I Need?

Start with the power connection specified by your graphics card manufacturer. If it calls for the supplied adapter, use it.

Dual 8-pin Fm-28124PTHIS PAGE
Choose this kit when your card allows a dual 8-pin adapter and you have two separate PCIe GPU power leads.
See this dual 8-pin listing for additional sleeving colors.
Compare this version if your card permits a third-party adapter with three PCIe 8-pin inputs.
Compare this version if your card permits a third-party adapter with four PCIe 8-pin inputs.
Compare this version if your card allows an extension and you need to lengthen an existing 16-pin GPU power cable.

What's in the Box

1 × 450 mm GPU power adapter cableCable combs

Installation & Use

1
Shut down the PC and unplug its AC power cord.
2
Before plugging in the adapter, plan the cable route and allow room for the side panel. FormulaMod’s routing guide shows about 35 mm of straight cable before the first bend. Avoid twisting the cable or making a sharp bend near the plug.
3
Connect one original PCIe GPU power cable from your power supply to each 8-pin socket. Use two separate cables.
4
Push the 16-pin plug into the graphics card until it sits flush and the latch engages.
5
Before closing the case, check that the side panel clears the cable without pressing on it.

You’ll need two separate PCIe graphics card power cables for your PSU.

FAQ

Is the 12VHPWR connector male or female?

The 16-pin 12VHPWR plug is male and goes into the GPU. The two PCIe 8-pin sockets are female.

Can I use both plugs on a single daisy-chained PCIe cable?

Use a separate PCIe graphics card power cable for each 8-pin socket.

Can I use this cable with a GeForce RTX 5080 Founders Edition?

Use the supplied NVIDIA adapter for PCIe 8-pin conversion. NVIDIA calls for at least three independent PCIe 8-pin cables with that adapter.

How long is 450 mm in inches?

450 mm is approximately 17.7 inches.

Notes
  • Before routing the cable, check the clearance specified by your graphics card and power supply manufacturers.

FormulaMod Official Store

Recent Reviews
+