• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

Gigabyte GeForce RTX 4090 WINDFORCE 24G Water Block with Backplate | Granzon GBN-GV4090WF

stars, based on ( 0 ) review
$288.33 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GBN-GV4090WF

Full Armor water block for Gigabyte RTX 4090 WINDFORCE 24G

The Granzon GBN-GV4090WF replaces the stock cooler on the Gigabyte GeForce RTX 4090 WINDFORCE 24G (GV-N4090WF3-24GD) for use in a custom liquid cooling loop. Its nickel-plated copper cold plate draws heat from the GPU core, memory, and voltage regulators. The included aluminum backplate mounts behind the graphics card PCB.

Fits
WINDFORCE 24G
Cold plate
Nickel-plated copper
Ports
G1/4
Microchannels
0.3 mm

Compatibility

Granzon lists the following graphics cards for matching PCB layouts.

  • ✓GIGABYTE GeForce RTX 4090 WINDFORCE 24G (GV-N4090WF3-24GD)
  • ✓AORUS GeForce RTX 4090 XTREME WATERFORCE 24G (matching PCB only)

Before ordering, check the model on your card label and verify the PCB layout. For XTREME WATERFORCE, have FormulaMod confirm your exact PCB revision.

Granzon GBN-GV4090WF compatibility reference showing the Gigabyte RTX 4090 WINDFORCE 24G with its three stock fans

GIGABYTE GeForce RTX 4090 WINDFORCE 24G with its stock cooler.

Design Highlights

Granzon GBN-GV4090WF underside showing the cold plate contact surfaces and port housing

Full-cover cold plate

Raised contact areas meet the GPU, memory, and power circuitry. Coolant passes through 0.3 mm jet microchannels in the cold plate.

Granzon GBN-GV4090WF angled view of the front armor, vent pattern, and port end

Aluminum front armor and backplate

The black aluminum armor wraps around the board. The aluminum sits outside the coolant path, and the backplate mounts separately behind the PCB.

Key Specifications

Model (SKU)GBN-GV4090WF
Cooling coverageGPU core, memory, and VRM
Cold plateNickel-plated copper
Front armor and backplateBlack aluminum, outside the coolant path
Microchannels0.3 mm
Side portsG1/4 thread. A is inlet and B is outlet.
Overall size (L × W × T)256.58 × 140.78 × 30.30 mm
Granzon GBN-GV4090WF dimension drawing showing front and end views of the water block

Manufacturer dimensions in millimeters.

Which Version Do I Need?

Match your card and PCB before choosing a water block.

Granzon GBN-GV4090WFTHIS PAGE
Choose this Full Armor block for the WINDFORCE 24G or a confirmed matching XTREME WATERFORCE 24G PCB.
Choose this Full Armor model for a matching AORUS MASTER 24G or GIGABYTE GAMING OC 24G PCB.
Choose this acrylic-top block if you have the original WINDFORCE 24G and prefer a clear cover.

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × backplate1 × mounting hardware set

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system. Remove the card and take off its stock cooler and backplate. Clean off the old thermal materials.
2
Place thermal pads on the memory and VRM contact points specified for your PCB. Apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate. Secure them with the mounting hardware, tightening evenly.
4
Connect the tubing with G1/4 fittings. Route coolant into port A and out of port B, and seal the unused ports with stop plugs.
5
Fill the loop and check for leaks with only the pump powered. Power the graphics card after the loop passes the leak test.

You also need a pump, radiator, G1/4 tubing fittings, tubing, and coolant.

Granzon GBN-GV4090WF exploded installation diagram showing the water block, graphics card PCB, backplate, and mounting hardware

Manufacturer assembly diagram showing the block, PCB, and backplate.

FAQ

Will it fit my Gigabyte RTX 4090 WINDFORCE V2?

The WINDFORCE V2 24G (GV-N4090WF3V2-24GD) is not listed for this block. Check your exact card model and PCB before ordering.

Will it fit my AORUS RTX 4090 XTREME WATERFORCE?

Granzon lists the XTREME WATERFORCE 24G for a matching PCB. Ask FormulaMod to confirm your exact PCB revision before ordering.

Which fittings and port direction should I use?

Use G1/4 fittings. Connect the supply to inlet A and the return to outlet B, then plug the unused ports.

Is a printed English manual included?

The block ships without a printed English manual. The assembly diagram shows how the block, PCB, and backplate fit together.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+