• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS ROG Z11 Water Cooling Kit for Single-GPU Builds, Bykski RGV-AS-Z11-P, 5V ARGB

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-AS-Z11-P

Custom water cooling kit for the ASUS ROG Z11

The Bykski RGV-AS-Z11-P kit is designed for a custom loop that cools the CPU and one graphics card in an ASUS ROG Z11 case. Its front-mounted distro plate routes coolant to the CPU and GPU water blocks. The clear acrylic plate has G1/4 ports and 5V addressable RGB lighting.

Fits
ASUS ROG Z11
Loop
CPU + one GPU
Plate ports
G1/4
Plate lighting
5V 3-pin ARGB

Compatibility

Check your case, CPU socket, and graphics card before ordering.

  • ✓ASUS ROG Z11 case

CPU. Choose the Intel or AMD kit option and confirm your exact socket with us.

Graphics card. Send us your full card model and PCB revision for a fit check before you order.

Bykski RGV-AS-Z11-P example installation shown from three angles in the ASUS ROG Z11 case

ASUS ROG Z11 example build. Case shown for reference.

Design Highlights

Bykski RGV-AS-Z11-P distro plate at the front of an ASUS ROG Z11 example build with red tubing

Angled view of the example build.

Front-mounted coolant routing

The distro plate mounts at the front of the case. Its internal channels connect the CPU and GPU water blocks to the rest of the loop.

Bykski’s reference layout uses two radiators. ASUS specifies a rear mount for a 120 mm or 240 mm radiator and lists fan mounts at the top.

Bykski RGV-AS-Z11-P clear distro plate with machined coolant channels, threaded ports, and a black finned pump cover

Clear acrylic plate with a DDC mount

The CNC-machined plate lets you see the coolant channels. A DDC pump mounts directly to the plate, and G1/4 ports connect it to the loop.

Key Specifications

Distro plate modelRGV-AS-Z11-P
Intel kit SKURGV-AS-Z11-P-Intel
AMD kit SKURGV-AS-Z11-P-AMD
Distro plate bodyClear CNC-machined acrylic (PMMA)
Distro plate dimensions (L × W × T)360 × 113.50 × 31.50 mm
Distro plate port threadG1/4
Pump mountDDC
Distro plate lighting5V ARGB (Bykski RBW), 3-pin motherboard header

Which Version Do I Need?

The AMD kit comes with a pump-equipped Z11 distro plate. The Intel kit comes with a Z11 distro plate and a separate covered DDC pump.

RGV-AS-Z11-P cooling kitTHIS PAGE
Choose this kit if you need the distro plate and the components for a CPU and single-GPU loop. Select the Intel or AMD configuration.
Choose the distro plate with a covered DDC pump if you already have the other loop components or want to select them individually.

What’s in the Box

RGV-AS-Z11-P distro plate with covered pump (AMD kit)RGV-AS-Z11-P distro plate and separate covered DDC pump (Intel kit)Mounting bracket for the distro plate reservoir5V 3-pin motherboard ARGB adapter cableCPU water block for your selected platform with a motherboard mounting backplate1 × full-cover GPU water block selected for your graphics card, with a matching backplate and thermal padsSlim 240 mm copper radiator with mounting screwsPWM ARGB case fans with mounting screwsARGB lighting controllerPre-bent acrylic hard tubing8 × 14 mm OD hard-tube fittings7 × 90° rotary fittings2 × 45° rotary fittingsExtension fittings, one each at 7.5, 20, 25, and 40 mmAdjustable extension fittings (16–22 mm and 41–69 mm)Loop stop plugsAir vent valvePull drain valve

After ordering, contact us to confirm your graphics card model and PCB revision so we can match your GPU water block.

Confirm the radiator count and mounting locations for your configuration with us before ordering.

If your configuration uses an acrylic-top full-cover gaming GPU block, that block includes 2 × G1/4 stop plugs as block accessories.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Confirm the radiator configuration and mounting locations for your Z11 before ordering. Check block fit and clearance for the fans and fittings before assembling the loop.
2
Remove the original coolers and install the matching CPU and GPU blocks. Use thermal paste and place GPU thermal pads as directed by the instructions for each block.
3
Mount the distro plate at the front of the case and check that the pump is seated on the plate. Install the confirmed cooling components, then test-fit the hard tubing before connecting it to the G1/4 ports.
4
For motherboard lighting sync, use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header. Keep it off the 12V RGB header.
5
Fill the loop and leak-test it with only the pump powered. Keep coolant at the pump inlet and check the fittings for leaks before powering the rest of the PC.

You also need PC liquid-cooling coolant.

Plate and Build Photos

Bykski RGV-AS-Z11-P reverse view of the clear distro plate showing the channel outlines and fasteners

Reverse side of the distro plate.

Bykski RGV-AS-Z11-P clear distro plate illuminated with multiple colors beside the black pump cover

Addressable lighting on the distro plate.

Bykski RGV-AS-Z11-P example build close-up showing the CPU block, tube bends, and illuminated fans

Water block and tubing in the example build.

Bykski RGV-AS-Z11-P example build in an ASUS ROG Z11 viewed straight from the side

Side view of the example build.

FAQ

Does the kit fit other ASUS ROG cases?

Bykski specifies the ASUS ROG Z11 for this distro plate.

How do I choose the GPU water block?

We match the block to your graphics card. After ordering, contact us to confirm the exact card model and PCB revision.

Can I plug the plate lighting into a 12V RGB header?

Use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header. A 12V 4-pin RGB header is incompatible.

Do I need to buy coolant separately?

Yes. Supply your own PC cooling coolant.

Notes
  • The case, motherboard, and memory water blocks are shown for reference only. The finished build depends on your configuration.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc., If not notified in time, the Bykski's latest real object and the newest list shall prevail

FormulaMod Official Store

Recent Reviews
+