Bykski
G1/4 Coolant Temperature Sensor Plug – Bykski B-PD5-TMR
stars, based on ( 0 ) review
FormulaMod Official Store
Bykski · B-PD5-TMR
G1/4 coolant temperature sensor plug
The Bykski B-PD5-TMR closes an unused G1/4 port in a custom PC water-cooling loop and measures coolant temperature at that port. A 10 kΩ NTC thermistor sits inside the metal plug. The attached lead carries the temperature signal to a compatible 2-pin sensor input.
Fits
G1/4 ports
Sensor
10 kΩ NTC
Connector
2-pin
Use With
Choose an unused female G1/4 port.
- ✓G1/4 ports on pumps, reservoirs, distro plates, and CPU or GPU water blocks
- ✓A 2-pin temperature input that supports a 10 kΩ NTC probe
Check that the port has room for the probe tip, and confirm sensor input support in your device manual.
Key Specifications
| Model | B-PD5-TMR |
|---|---|
| Thread | G1/4 male |
| Sensor | 10 kΩ NTC thermistor |
| Connector | 2-pin |
| Body material | Metal |
| Body size (black) | 17.4 mm cap diameter × 15.8 mm overall height |
| Color options | Black or Silver |
What's in the Box
Temperature-sensing plug with attached 2-pin lead
FAQ
Does this plug measure flow rate?
The sensor measures coolant temperature only. The plug seals the port.
Can I connect it to a motherboard?
Check your motherboard manual for a 2-pin temperature sensor input that supports a 10 kΩ NTC probe.
Notes
- Not responsible for any damage caused by or when using this product.







