Bykski
PNY RTX 5090 Water Block with Backplate – Bykski N-PNY5090-SR
Full-cover water block for the PNY RTX 5090
The Bykski N-PNY5090-SR replaces the stock cooler on the PNY GeForce RTX 5090 32GB GDDR7 with the PCB layout shown below. Connect it to a custom liquid cooling loop to cool the GPU core, memory, and power delivery components with one block. The included aluminum backplate mounts behind the card.
Compatibility
Bykski specifies the PNY board layout shown here.
- ✓PNY GeForce RTX 5090 32GB GDDR7 with the PCB layout shown
Before ordering, check your exact card model and compare its PCB shape, mounting holes, and component positions with the photo. If you have a different layout or cannot verify it, ask for a fit check before ordering.
Design Highlights
One cold plate for the GPU, memory, and VRM
The T2 copper cold plate picks up heat from the GPU die, memory, and voltage regulators. Raised contact surfaces line up with the components shown in the installation diagram.
0.3 mm jet microchannels
Coolant passes through the fine channels machined into the cold plate above the GPU.
Stainless steel panel with end ports
The block is 17 mm thick. Check the dimension drawing when planning room for fittings and tubing at the end of the card.
Key Specifications
| Model (SKU) | N-PNY5090-SR |
|---|---|
| Cold plate | T2 copper |
| Panel | 304 stainless steel |
| Backplate | Black aluminum, passive |
| Port thread | G1/4 female inlet and outlet |
| Block (L × W × T) | 233.66 × 121.62 × 17.00 mm |
| Backplate (L × W × T) | 215.07 × 119.54 × 3.96 mm |
| Microchannel width | 0.3 mm |
| Seal material | EPDM |
| Net weight | 1.7 kg |
| Working temperature | −20 to 60°C |
| Block color | Titanium gray |
Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You’ll also need a pump, radiator, G1/4 fittings sized for your tubing, tubing, and coolant.
FAQ
How do I check if this water block fits my PNY RTX 5090?
Check your exact model and compare the board to Bykski’s PCB photo. Match the board outline, mounting holes, and component layout before ordering.
Which fittings do I need?
Both ports use G1/4 female threads. Choose G1/4 fittings that suit your loop’s tubing.
Does the included backplate connect to the liquid loop?
The aluminum backplate is passive. Connect your loop to the front water block.
Which thermal pads go between the card and the block?
Fit the supplied thermal pads to the memory and VRM areas shown. Apply your own thermal paste to the GPU die.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- A 36-month warranty is listed.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













