Bykski
PNY RTX 4090 XLR8 VERTO OC Water Block with Backplate | Bykski N-PNY4090-X
Full-cover water block for the PNY RTX 4090 XLR8 OC
The Bykski N-PNY4090-X replaces the stock air cooler on the PNY GeForce RTX 4090 24GB XLR8 Gaming VERTO EPIC-X RGB OC. It connects to a custom liquid cooling loop and cools the GPU core, memory, and voltage regulators through one nickel-plated copper cold plate. A separate black aluminum backplate mounts behind the card.
Compatibility
Bykski lists this graphics card PCB for the N-PNY4090-X.
- ✓PNY GeForce RTX 4090 24GB XLR8 Gaming VERTO EPIC-X RGB OC Triple Fan (VCG409024TFXXPB1-O)
Before ordering, check the part number on your card and compare the entire PCB with the photo here. Check the mounting holes, connectors, and component layout.
Design Highlights
One cold plate for the GPU, memory, and VRM
The raised surfaces on the copper cold plate line up with the GPU core, memory, and power stages. Thermal pads bridge the gap to the memory and power stages.
0.5 mm jet microchannels
Coolant flows through a bank of finely spaced fins over the GPU core. Bykski specifies a 0.5 mm gap between the fins.
5V addressable lighting
Use the lighting sync cable with a 5V 3-pin addressable RGB header. Bykski calls this connection RBW.
Key Specifications
| Model | N-PNY4090-X |
|---|---|
| Cold plate | 9 mm T2 high-purity copper, nickel plated |
| Top | Clear acrylic |
| Backplate | Black aluminum, outside the coolant path |
| Backplate (L × H × T) | 213.36 × 120.00 × 6.00 mm |
| Microchannel gap | 0.5 mm |
| Port thread | G1/4 |
| Lighting connector | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Match the block to the exact PNY card model and PCB.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator, G1/4 fittings matched to your tubing, tubing, and coolant.
FAQ
Which PNY RTX 4090 does this water block fit?
Bykski lists the XLR8 Gaming VERTO EPIC-X RGB OC Triple Fan (VCG409024TFXXPB1-O). Compare your card’s PCB with the bare-board photo in the Compatibility section before ordering.
Does this water block include an active backplate?
It includes a passive black aluminum backplate. Coolant flows through the front block only.
What fittings do I need?
Use G1/4 fittings sized for your tubing. Follow the IN and OUT marks on the block and plug unused ports.
Can I plug the lighting into a 12V RGB header?
Use a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the lighting.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













