Bykski
MSI RTX 4090 Ventus 3X 24G OC Water Block | Bykski N-MS4090VES-X with Backplate
Full-cover water block for the MSI RTX 4090 Ventus 3X 24G OC
The Bykski N-MS4090VES-X is a full-cover GPU water block for the MSI GeForce RTX 4090 Ventus 3X 24G OC. It replaces the stock air cooler to cool the GPU core, memory, and voltage regulators in a custom liquid-cooling loop. The included aluminum backplate mounts behind the card, and G1/4 ports connect the block to the loop.
Compatibility
Bykski lists this card and its pictured PCB layout.
- ✓MSI GeForce RTX 4090 Ventus 3X 24G OC
Before ordering, confirm the full card name and compare your PCB with the full bare-board photo in the product gallery.
Design Highlights
Direct contact across the board
The nickel-plated copper plate contacts the GPU core, memory, and voltage regulators through their thermal interfaces. Coolant flows through jet microchannels in the cold plate.
Visible channels and marked ports
The clear acrylic top exposes the coolant channels. Follow the IN and OUT markings on the front of the block when connecting your fittings.
5V addressable lighting
Bykski calls its addressable lighting RBW. Use the sync cable to connect the strip to a 5V 3-pin ARGB motherboard header.
Key Specifications
| Model (SKU) | N-MS4090VES-X |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and VRM |
| Inlet and outlet thread | G1/4 |
| Block (L × W × T) | 239.85 × 160.49 × 26.15 mm |
| Backplate (L × W × T) | 239.81 × 130.50 × 6.00 mm |
| Lighting connector | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
These blocks fit the listed Ventus 3X 24G OC layout. Choose the top and backplate design you prefer.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need G1/4 fittings for your tubing, a pump, a radiator, tubing, and coolant.
FAQ
Which MSI RTX 4090 Ventus does this block fit?
Bykski lists the MSI GeForce RTX 4090 Ventus 3X 24G OC. Match your card’s PCB to the bare-board photo in the gallery before ordering.
What size fittings do I need?
Use G1/4 fittings sized for your tubing. Seal any unused terminal ports with the included stop plugs.
Can I plug the lighting into a 12V RGB header?
Use a 5V 3-pin ARGB header for the RBW lighting. A 12V 4-pin RGB header is incompatible and can damage the LEDs.
Does the included backplate need its own coolant lines?
The block handles coolant flow. The included passive aluminum backplate mounts behind the PCB.
Where do the thermal pads go?
Place the pads on the memory chips and the power components marked in the pad placement diagram.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














