Bykski
NVIDIA H200 141GB Water Block – Bykski N-H200-SR-QH, Vacuum-Brazed with Backplate
Full-cover water block for NVIDIA H200 141GB
The Bykski N-H200-SR-QH is a full-cover water block and backplate kit listed for NVIDIA H200 141GB. In a custom liquid-cooling loop, its cold plate transfers heat from the GPU die, memory, and voltage regulation components to the coolant, which carries the heat to a separate radiator. Confirm your card part number and PCB revision before ordering.
Compatibility
Model listed by Bykski
- ✓NVIDIA H200 141GB
H200 models with different board layouts can share the same 141GB capacity. Confirm compatibility for your exact card part number and PCB revision before ordering.
Design Highlights
One cold plate for the GPU, memory, and VRM
The nickel-plated, oxygen-free copper plate has raised contact surfaces for the GPU die, memory, and voltage regulation components. Coolant carries their heat away through the block.
Vacuum-brazed block with end-mounted fittings
The block is assembled by vacuum brazing. Its two hose barbs come installed at the same end, so plan your tube routing with clearance alongside that end of the card.
Key Specifications
| Model | N-H200-SR-QH |
|---|---|
| Cooling type | Full-cover GPU water block for a custom loop |
| Cold plate | Nickel-plated oxygen-free copper |
| Construction | Vacuum brazing |
| Backplate | Aluminum alloy |
| Block dimensions | 266.63 × 98.24 × 19.10 mm |
| Backplate dimensions | 182.33 × 94.78 × 3.86 mm |
| Port thread | G1/4 female |
| Installed fittings | 2 hose barbs |
Which Version Do I Need?
Confirm your board’s compatibility with each cooler before choosing a standalone block or all-in-one kit.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You’ll also need a pump, radiator, reservoir or pump-reservoir combo, coolant, compatible tubing, and any additional G1/4 fittings required by your loop.
FAQ
How do I tell H200 NVL and H200 SXM apart?
NVIDIA lists both with 141GB of memory. H200 NVL is a PCIe add-in card. H200 SXM is a module used in HGX systems.
Does this water block cool the VRM?
Yes. The cold plate draws heat from the voltage regulation components as well as the GPU die and memory.
Do I need a separate pump and radiator?
Yes. This block connects to a custom loop that circulates coolant with a pump and releases heat through a radiator.
Which fittings and tubing should I use?
The block has G1/4 female threads and two preinstalled hose barbs. Match the tubing to the barbs on your block.
How much space should I leave in the case?
Use the block dimensions to check clearance at the card. Leave space for the tubes to bend at the fitting end and check the case mounts for your chosen radiator.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The product does NOT include printed instructions. See the exploded assembly drawing in Installation & Use.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.













