Bykski
Gigabyte RTX 4060 Ti Gaming OC 8G/16G Water Block with Backplate — Bykski N-GV4060TIGMOC-X
Full-cover water block for Gigabyte RTX 4060 Ti Gaming OC
The Bykski N-GV4060TIGMOC-X replaces the stock cooler on supported Gigabyte GeForce RTX 4060 Ti Gaming OC cards so they can run in a custom liquid cooling loop. Its T2 copper cold plate draws heat from the GPU, memory, and voltage regulators. A matching aluminum backplate and 5V addressable lighting are included.
Compatibility
Bykski lists these two Gigabyte Gaming OC models.
- ✓Gigabyte GeForce RTX 4060 Ti Gaming OC 8G
GV-N406TGAMING OC-8GD - ✓Gigabyte GeForce RTX 4060 Ti Gaming OC 16G
GV-N406TGAMING OC-16GD
Before ordering, verify your exact card model and compare its PCB layout with the board photo in the product gallery.
Design Highlights
Full-cover cold plate under clear acrylic
The T2 copper cold plate spans the GPU, memory, and power delivery components. The clear acrylic top lets you see the coolant path and the marked inlet and outlet.
Jet microchannels over the GPU
Coolant passes between fins with 0.3 mm gaps over the GPU core. The fins provide more surface area for heat to transfer to the coolant.
5V addressable lighting
The included strip lights the clear top. Use the sync cable with a 5V 3-pin ARGB motherboard header.
Key Specifications
| Model | N-GV4060TIGMOC-X |
|---|---|
| Cooling coverage | GPU core, memory, and VRM |
| Cold plate | T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Port thread | G1/4 inlet and outlet |
| Jet microchannel gap | 0.3 mm |
| Lighting connector | 5V 3-pin ARGB (RBW) |
| Water block (L × W × T) | 173.60 × 135.50 × 26.45 mm |
| Backplate (L × W × T) | 173.61 × 105.50 × 6.00 mm |
Which Version Do I Need?
If your card is from ASUS or MSI, match its exact model to the corresponding water block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the custom loop, you also need a pump and reservoir, radiator and fans, tubing with matching G1/4 fittings, and coolant.
FAQ
Does this water block fit the RTX 4060?
It fits the two Gigabyte GeForce RTX 4060 Ti Gaming OC boards listed above. The GeForce RTX 4060 without the Ti suffix is outside that fit list.
Will it fit both Gigabyte Gaming OC memory capacities?
Yes. Bykski lists the 8G and 16G Gaming OC models. Verify your exact card number and PCB layout before ordering.
What are the water block and backplate made of?
The water block has a T2 copper cold plate and a clear acrylic top. The included backplate is black aluminum.
Can I use a 12V RGB header for the lighting?
Use a 5V 3-pin addressable RGB header. Connecting the strip to a 12V 4-pin RGB header can damage it.
Which fittings do I need?
Use G1/4 fittings sized for your tubing. Follow the inlet and outlet markings on the block and plug the unused ports.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














