• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS TUF RTX 4090 OG OC & ROG Strix LC RTX 4090 Water Block with Backplate | Bykski N-AS4090TUFOG-X

stars, based on ( 0 ) review
€137.03 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-AS4090TUFOG-X

Full-cover GPU water block for ASUS TUF RTX 4090 OG OC and ROG Strix LC

The Bykski N-AS4090TUFOG-X replaces the stock cooler on supported cards such as the ASUS TUF Gaming GeForce RTX 4090 OG OC. Its nickel-plated copper cold plate transfers heat from the GPU die, memory, and voltage regulators to a custom liquid cooling loop. The block includes an aluminum backplate and uses 5V addressable RGB.

Fits
Select ASUS TUF OG OC and ROG Strix LC cards
Cold plate
Nickel-plated T2 copper
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check your ASUS card’s full model number.

  • ✓ASUS TUF Gaming GeForce RTX 4090 24GB OG OC Edition (TUF-RTX4090-O24G-OG-GAMING)
  • ✓ASUS ROG Strix LC GeForce RTX 4090 24GB (ROG-STRIX-LC-RTX4090-24G-GAMING)
  • ✓ASUS TUF Gaming GeForce RTX 4070 Ti SUPER 16GB OG OC Edition (TUF-RTX4070TIS-O16G-OG-GAMING)

Not compatible:

  • ✗ASUS TUF Gaming GeForce RTX 4090 (non-OG)
  • ✗ASUS ROG Strix GeForce RTX 4090 (air-cooled)

Before ordering, check the exact model on your card label and verify the PCB layout with FormulaMod if you are unsure.

Bykski N-AS4090TUFOG-X compatibility photo of a bare ASUS GeForce RTX 4090 board

Bykski’s ASUS RTX 4090 PCB reference photo.

Design Highlights

Bykski N-AS4090TUFOG-X diagram showing the colored coolant path through the water block

Bykski coolant flow illustration.

Full-cover cooling

The cold plate draws heat from the GPU die, memory, and voltage regulators. Coolant carries that heat to the radiator in your loop.

Bykski N-AS4090TUFOG-X close-up illustration of the jet microchannel fins

Jet microchannels

Coolant passes through fine channels machined into the cold plate over the GPU die.

Bykski N-AS4090TUFOG-X angled front view showing its clear acrylic top and port terminal

Clear acrylic top and ports on both sides

The clear top exposes the channels. The G1/4 terminal provides connections on both sides, so you can route the tubing from the side that fits your build.

Key Specifications

ModelN-AS4090TUFOG-X
Cold plateNickel-plated T2 copper
TopClear acrylic (PMMA)
BackplateBlack aluminum backplate, outside the coolant path
Cooling coverageGPU die, memory, and VRM
Port threadG1/4
Lighting5V 3-pin addressable RGB (RBW)
Water block (L × W × T)267.90 × 157.25 × 30.19 mm
Backplate (L × W × T)266.95 × 135.47 × 6.00 mm
Bykski N-AS4090TUFOG-X dimension drawing showing the water block above the backplate

Bykski dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Compare the top material and lighting, then check the PCB list for the model you choose.

Bykski N-AS4090TUFOG-XTHIS PAGE
Choose this version for a clear acrylic top and 5V 3-pin ARGB.
Choose this version for a stainless steel panel and POM construction with no lighting.

What's in the Box

1 × GPU water block1 × aluminum backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Bykski N-AS4090TUFOG-X black aluminum backplate with its mounting holes

Installation & Use

1
Power off the PC, remove the graphics card, and take off its stock cooler. Clean off the old thermal materials.
2
Use the supplied thermal pads on the memory and power components shown in the installation guide for your exact PCB. Apply your own thermal paste to the GPU die.
3
Line up the mounting holes, fit the block and backplate, and tighten the mounting screws evenly. Stop if parts do not line up.
4
Connect the loop with G1/4 fittings and close the unused ports with the supplied plugs. For lighting, use a compatible cable to connect the block to a 5V 3-pin ARGB header.
5
Leak-test the filled loop with the graphics card unpowered before starting the PC.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

Bykski N-AS4090TUFOG-X exploded mounting diagram with numbered callouts for the block, pads, PCB, hardware, and backplate

① Block · ② Thermal pads · ③ Your GPU PCB · ④ Washers · ⑤ Spring screws · ⑥ Backplate · ⑦ Backplate screws

FAQ

Which ASUS TUF RTX 4090 does this water block fit?

Check for TUF-RTX4090-O24G-OG-GAMING on the card label and confirm the PCB against the compatibility reference before ordering.

Does it fit an air-cooled ROG Strix RTX 4090?

This block fits the ROG Strix LC 24GB model listed above. The air-cooled Strix uses a different block.

Does the block include a backplate?

Yes. The included black aluminum backplate mounts behind the graphics card PCB, outside the coolant path.

Which fittings do I need?

Use G1/4 fittings matched to your tubing and close unused ports with the included stop plugs.

Can I plug the lighting into a 12V RGB header?

Use a 5V 3-pin ARGB header. Connecting the lighting to 12V RGB can damage it.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+