Bykski
ASUS TUF RTX 4090 OG OC & ROG Strix LC RTX 4090 Water Block with Backplate | Bykski N-AS4090TUFOG-X
Full-cover GPU water block for ASUS TUF RTX 4090 OG OC and ROG Strix LC
The Bykski N-AS4090TUFOG-X replaces the stock cooler on supported cards such as the ASUS TUF Gaming GeForce RTX 4090 OG OC. Its nickel-plated copper cold plate transfers heat from the GPU die, memory, and voltage regulators to a custom liquid cooling loop. The block includes an aluminum backplate and uses 5V addressable RGB.
Compatibility
Check your ASUS card’s full model number.
- ✓ASUS TUF Gaming GeForce RTX 4090 24GB OG OC Edition (TUF-RTX4090-O24G-OG-GAMING)
- ✓ASUS ROG Strix LC GeForce RTX 4090 24GB (ROG-STRIX-LC-RTX4090-24G-GAMING)
- ✓ASUS TUF Gaming GeForce RTX 4070 Ti SUPER 16GB OG OC Edition (TUF-RTX4070TIS-O16G-OG-GAMING)
Not compatible:
- ✗ASUS TUF Gaming GeForce RTX 4090 (non-OG)
- ✗ASUS ROG Strix GeForce RTX 4090 (air-cooled)
Before ordering, check the exact model on your card label and verify the PCB layout with FormulaMod if you are unsure.
Design Highlights
Full-cover cooling
The cold plate draws heat from the GPU die, memory, and voltage regulators. Coolant carries that heat to the radiator in your loop.
Jet microchannels
Coolant passes through fine channels machined into the cold plate over the GPU die.
Clear acrylic top and ports on both sides
The clear top exposes the channels. The G1/4 terminal provides connections on both sides, so you can route the tubing from the side that fits your build.
Key Specifications
| Model | N-AS4090TUFOG-X |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Top | Clear acrylic (PMMA) |
| Backplate | Black aluminum backplate, outside the coolant path |
| Cooling coverage | GPU die, memory, and VRM |
| Port thread | G1/4 |
| Lighting | 5V 3-pin addressable RGB (RBW) |
| Water block (L × W × T) | 267.90 × 157.25 × 30.19 mm |
| Backplate (L × W × T) | 266.95 × 135.47 × 6.00 mm |
Which Version Do I Need?
Compare the top material and lighting, then check the PCB list for the model you choose.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Which ASUS TUF RTX 4090 does this water block fit?
Check for TUF-RTX4090-O24G-OG-GAMING on the card label and confirm the PCB against the compatibility reference before ordering.
Does it fit an air-cooled ROG Strix RTX 4090?
This block fits the ROG Strix LC 24GB model listed above. The air-cooled Strix uses a different block.
Does the block include a backplate?
Yes. The included black aluminum backplate mounts behind the graphics card PCB, outside the coolant path.
Which fittings do I need?
Use G1/4 fittings matched to your tubing and close unused ports with the included stop plugs.
Can I plug the lighting into a 12V RGB header?
Use a 5V 3-pin ARGB header. Connecting the lighting to 12V RGB can damage it.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














