Bykski
4-Pin Molex Cable with 12V DC Jack Input for Water Pumps and Fans, Bykski B-DC-D4P-X
12V DC power adapter cable for a water pump or fan
The Bykski B-DC-D4P-X connects an external 12V DC supply to a compatible water-cooling pump or case fan. The power supply plugs into the barrel jack, and the pump or fan connects to its matching power lead. Use this cable to run the pump while the rest of the PC stays off for filling or leak testing.
Use With
- ✓External 12V DC supply with a matching male barrel plug
- ✓12V water pump with a matching 4-pin peripheral Molex power plug
- ✓12V case fan with a matching small 4-pin fan power plug
Before buying a power supply, confirm the barrel plug dimensions and center-contact polarity required by this cable. Check the pump or fan's power connector, voltage, and current requirements before connecting it.
Design Highlights
External DC input
The female barrel jack takes power from an external 12V DC supply, so you can fill your loop with the PC off.
Separate pump and fan power connectors
Use the wider 4-pin peripheral Molex connector for a matching pump. The smaller connector sits on a separate two-wire fan power lead.
Key Specifications
| Model | B-DC-D4P-X |
|---|---|
| DC input | Female DC barrel jack |
| External supply | 12V DC |
| Pump connector | 4-pin peripheral Molex |
| Fan connector | Small 4-pin fan power connector, two wires |
| Overall length | 280 mm nominal, barrel jack to Molex |
| Color | Black |
What's in the Box
Installation & Use
You also need a matching external 12V DC supply.
FAQ
Which end of the 4-pin Molex adapter takes power?
The external supply connects to the round DC jack. The Molex end connects to the water pump's power plug.
What does the smaller 4-pin connector do?
It supplies power to a matching 12V fan through a two-wire lead.
Which parts come in the box?
You get one adapter cable. The external 12V power supply is sold separately.
Can I fill the loop with the PC off?
Yes. An external 12V supply can run a compatible water pump independently while you fill the loop and check for leaks.
- 1. This product is only an adapter (conversion cable), without any DC power plug.











