• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Acrylic & PETG Hard Tube Bending Kit, 12/14/16 mm OD | Bykski

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski

Hard Tube Bending Kit for Acrylic and PETG

This Bykski hard tube bending kit helps you shape acrylic or PETG tubing for a custom PC water-cooling loop. The bending cord supports the tube from the inside while the mold shapes the bend. Choose a kit that matches both the inner and outer diameters of your tubing, then select the cutting and heating tools you need.

Fits
12, 14, or 16 mm OD
Bend angles
45°, 90°, and 180°
Included
Chamfer tool

Fits / Use With

Match the kit to both measurements of your acrylic or PETG tube.

  • ✓8 mm ID × 12 mm OD
  • ✓10 mm ID × 14 mm OD
  • ✓12 mm ID × 16 mm OD

The mold fits around the tube’s outer diameter. The bending cord goes inside, so check the inner diameter before ordering.

Key Specifications

Tube materialsAcrylic (PMMA) and PETG rigid tubing
Tube ID × OD8 × 12 mm / 10 × 14 mm / 12 × 16 mm
Bending cord diameterApprox. 7.5 mm / 9.5 mm / 11.5 mm, respectively
Mold angles45°, 90°, and 180° in the selected tube size
Cutting optionsHand saw for acrylic, cutter for PETG, or no cutting tool
Heat gunOptional

What's in the Box

1 set of 3 angle molds1 bending cord1 chamfer tool

The molds and cord match the size you select. Add one cutting tool and a heat gun through the options if you need them.

How to Cut and Bend the Tube

1
Measure and mark the cut. Use the hand saw for acrylic or the tube cutter for PETG.
2
Chamfer the inner and outer edges of the cut end and clear away the debris.
3
Slide the bending cord into the tube, then heat the tube at the bend. Keep direct heat off the mold.
4
Shape the softened tube around the mold. Let the tube cool before removing the mold and pulling out the cord.

Have a heat gun and the appropriate cutting tool on hand if you leave them out of your kit.

FAQ

Can I use this kit for both acrylic and PETG?

Yes. Choose the size that matches your tube’s inner and outer diameters, then select the hand saw for acrylic or the cutter for PETG.

Which kit fits 16 mm hard tubing?

Choose the 12 × 16 mm option if your tube measures 12 mm inside and 16 mm outside. That option comes with an approximately 11.5 mm bending cord.

Does the kit come with a heat gun?

A heat gun is included when you select Heat gun under Extra Tool.

Notes
  • Due to different batches, the color of the products may be different from the picture shown, please use it as usual.
  • In case of different product batches to the appearance and structure, no further notice, the real object shall prevail.
  • Hand saws and cutters are sharp, please use them with care.

FormulaMod Official Store

Recent Reviews
+