• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS TUF RX 7900 XTX OC / 7900 XT OC Full-Cover GPU Water Block + Backplate | Bykski A-AS7900XTX-X

stars, based on ( 0 ) review
$146.41 set
items available
Contact Us
FormulaMod Official Store
Bykski · A-AS7900XTX-X

Full-cover water block for ASUS TUF RX 7900 XTX OC and XT OC

The Bykski A-AS7900XTX-X is a full-cover GPU water block for the ASUS TUF Gaming Radeon RX 7900 XTX OC and RX 7900 XT OC. It replaces the stock air cooler and transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. The kit includes an aluminum backplate and 5V addressable lighting.

Fits
ASUS TUF Gaming OC
Port thread
G1/4
Lighting
5V 3-pin ARGB
Backplate
Included

Compatibility

Match the exact ASUS model and PCB layout.

  • ✓ASUS TUF Gaming Radeon RX 7900 XTX OC Edition (TUF-RX7900XTX-O24G-GAMING)
  • ✓ASUS TUF Gaming Radeon RX 7900 XT OC Edition (TUF-RX7900XT-O20G-GAMING)

Check the PCB layout for your exact card before ordering. Contact support if you need help identifying the board revision.

Bykski A-AS7900XTX-X compatibility reference showing the ASUS TUF Gaming RX 7900 XTX OC with its stock cooler

ASUS TUF Gaming RX 7900 XTX OC with its stock air cooler, shown for identification.

Design Highlights

Bykski A-AS7900XTX-X angled view of the acrylic top, coolant channels, and fitting terminal

Copper cold plate under clear acrylic

The nickel-plated T2 copper base draws heat from the GPU, memory, and VRMs. The acrylic top lets you see the coolant channels and the G1/4 terminal.

Bykski A-AS7900XTX-X black backplate with mounting holes and a notched edge

Black aluminum backplate

The included backplate mounts on the back of the graphics card, opposite the water block. Coolant stays inside the block.

Bykski A-AS7900XTX-X clear water block illuminated in red, violet, and blue

5V addressable lighting

Use the included adapter cable to connect the light strip to a 5V 3-pin ARGB motherboard header. You can also use a compatible 5V RBW controller. A 12V 4-pin RGB header can damage the LEDs.

Key Specifications

Bykski modelA-AS7900XTX-X
Cold plateNickel-plated T2 copper
TopClear acrylic
BackplateBlack aluminum
Inlet and outletG1/4 thread
Lighting5V 3-pin addressable RGB (RBW)
Water block (L × W × T)276.90 × 171.08 × 23.25 mm
Backplate (L × W × T)276.98 × 140.55 × 6.07 mm
Bykski A-AS7900XTX-X dimension drawing with front and side views of the block above the backplate

Bykski drawing. The block is shown above the backplate. Dimensions are in millimeters.

Which Version Do I Need?

Choose the block by the graphics card’s exact board design.

Bykski A-AS7900XTX-XTHIS PAGE
Choose this block for the ASUS TUF Gaming OC cards listed above.
Choose this block for the AMD Radeon RX 7900 XT reference PCB.
Choose this block for the GIGABYTE Radeon RX 7900 XTX Gaming OC after matching the PCB.

What's in the Box

1 × full-cover GPU water block1 × backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set1 × 5V ARGB light stripMotherboard ARGB adapter cable (5V, 3-pin)

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power down the PC, remove the graphics card, and take off its stock cooler. Clean away the old paste and pads.
2
Dry-fit the block to check the mounting holes. Apply your own thermal paste to the GPU die and place the pads on the memory and VRM locations marked for your PCB.
3
Align the block, PCB, and backplate. Secure them with the supplied mounting hardware and tighten the screws gently and evenly.
4
Connect the loop with G1/4 fittings. Follow the inlet and outlet markings, then seal the unused ports with the stop plugs.
5
Leak-test the loop with the graphics card unpowered. Use the included adapter cable to connect the light strip to a 5V 3-pin ARGB motherboard header, or use a compatible 5V RBW controller.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

Bykski A-AS7900XTX-X exploded drawing showing the block, thermal pads, graphics card PCB, backplate, and screws

Bykski assembly drawing. 1 water block · 2 thermal pads · 3 graphics card PCB · 4 block screws · 5 backplate · 6 backplate screws.

FAQ

Does this block fit both ASUS TUF RX 7900 XTX OC and RX 7900 XT OC?

Yes. Bykski lists both ASUS TUF Gaming OC models named above. Check your exact ASUS model number and PCB before ordering.

Can I use it on an AMD reference RX 7900 XT or RX 7900 XTX?

The verified fit list for this block does not include either AMD reference card. If you have a reference card, choose a block listed for your exact PCB.

Is this an all-in-one cooler?

This is a GPU block for a custom loop. You'll need a pump, radiator, G1/4 fittings, tubing, and coolant.

How do I connect the lighting?

Use the included adapter cable to connect the light strip to a 5V 3-pin ARGB motherboard header. A compatible 5V RBW controller is another option. A 12V 4-pin RGB header can damage the LEDs.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+