Bykski
ASRock RX 6900 XT OC Formula 16GB GPU Water Block with Backplate – Bykski A-AR6900XTOCF-X
Full-cover water block for the ASRock RX 6900 XT OC Formula
The Bykski A-AR6900XTOCF-X is a full-cover GPU water block for the ASRock Radeon RX 6900 XT OC Formula 16GB. It replaces the stock air cooler and transfers heat from the GPU core, graphics memory, and voltage regulators to a custom liquid-cooling loop. This version includes a black aluminum backplate and 5V addressable lighting.
Compatibility
Match the OC Formula board layout.
- ✓ASRock Radeon RX 6900 XT OC Formula 16GB (RX6900XT OCF 16G)
Before ordering, confirm the full model number and compare your card’s PCB with Bykski’s reference layout.
Design Highlights
Cooling across the board
The cold plate spans the GPU die, memory, and voltage regulators. Coolant flows through the block and carries their heat to the radiator.
Jet microchannels in the copper plate
The cold plate uses a jet microchannel design with 0.5 mm gaps.
5V addressable lighting
For motherboard control, use the included adapter cable between the light strip and a 5V 3-pin ARGB header. A compatible Bykski 5V RBW controller can also run the strip.
Key Specifications
| Model | A-AR6900XTOCF-X |
|---|---|
| Cold plate | T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, mounted behind the PCB |
| Cooling coverage | GPU core, graphics memory, and VRM |
| Port thread | G1/4 inlet and outlet |
| Water block (L × H × T) | 264.59 × 152.28 × 23.28 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Use the series name and PCB to choose between these two Bykski blocks.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator, G1/4 fittings sized for your tubing, tubing, and coolant.
FAQ
How do I check whether this RX 6900 XT block fits my card?
Check for ASRock’s RX6900XT OCF 16G model number and match the PCB to Bykski’s reference layout.
Are thermal pads included, and where do they go?
A thermal pad set is included. Position the pads at the memory and voltage-regulator contact points specified in the installation guide for your mounting kit.
Which fittings do I need?
Use G1/4 fittings at the block and choose fittings that match your tubing size.
Can I connect the lighting to a 12V RGB header?
The block’s lighting requires a 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage it.
- This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
- Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
- Not responsible for any damage caused by or when using this product. Please use at your own risk.














