• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

G1/4 Male-to-Male Expansion Joint for PC Water Cooling – Bykski B-EXPJ-X Series

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-EXPJ-X Series

Telescoping expansion joint for PC water cooling

The Bykski EXPJ series is a telescoping fitting for custom PC water cooling. It joins two aligned G1/4 female ports, such as the facing ports on two GPU water blocks connected in series. The joint adjusts along its axis so you can match the space between the ports.

Fits
G1/4 female ports
Thread ends
Male-to-male
Adjustment
Telescoping

Fits / Use With

  • ✓Two facing, aligned G1/4 female ports in a custom PC water-cooling loop

Confirm the gap between the port seating faces and the clearance around the fitting before ordering.

Design Highlights

Bykski B-EXPJ-X41 black expansion joint with a long center sleeve and diamond-knurled collars

Black B-EXPJ-X41 shown.

Adjust the reach along the same axis

The center section slides to match the gap between facing ports. Measure between the two port seating faces before choosing a size.

Bykski B-EXPJ-X31 gold expansion joint showing the diamond-knurled collars and front sealing ring

Gold B-EXPJ-X31 shown.

Diamond-knurled grip

The textured collar gives you a place to grip the fitting when you loosen it to adjust the length.

Bykski B-EXPJ-X silver expansion joint with the front bore, both exterior threads, and front sealing ring visible

Silver B-EXPJ-X shown.

Threaded at both ends

Each end screws into a female port. Coolant flows through the center of the fitting from one port to the other.

Key Specifications

B-EXPJ-X adjustment range16–22 mm
B-EXPJ-X31 maximum reach31 mm
B-EXPJ-X41 adjustment range41–69 mm
ThreadG1/4 male at both ends
Threaded length5 mm per end
Outside diameter20.72 mm
B-EXPJ-X41 materialBrass
ColorsBlack, silver, white, and gold
Bykski B-EXPJ-X41 manufacturer end-view drawing marked 20.72 for the outside diameter

Manufacturer end view of the B-EXPJ-X41. Diameter in millimeters.

Which Version Do I Need?

Match the gap between the two port seating faces to the fitting’s adjustment range.

Bykski B-EXPJ-X SeriesTHIS PAGE
Choose a telescoping EXPJ joint when you need to adjust the length between two facing ports. If your fit depends on the shortest setting of the B-EXPJ-X31, confirm that setting before ordering.
Choose this fixed-length G1/4 male-to-male coupler when you need a rotary connection at a set spacing.

What's in the Box

1 × expansion joint in the selected size and color

Installation & Use

1
Shut down the PC. Check that the two G1/4 female ports face each other and measure the gap between their seating faces.
2
Select a size that covers the measured gap. Loosen the knurled adjustment collar and slide the joint to suit the spacing. Stay within the stated adjustment range to prevent separation and leaks.
3
Thread both ends into the ports by hand and check that the sealing rings seat evenly.
4
Leak-test the loop with the rest of the PC unpowered. Check both connections for leaks before powering up the system.

You’ll need two aligned G1/4 female ports on components in your custom water-cooling loop.

FAQ

Is an EXPJ expansion joint a cooling port plug?

It’s a through-fitting that carries coolant between two ports. Use it to join a pair of G1/4 female ports.

Can I connect two GPU water blocks with this fitting?

Yes, you can connect them in series when the two ports face each other, use G1/4 female threads, and fall within the joint’s adjustment range.

Where do I measure to choose a size?

Measure from one port’s seating face to the other along their shared centerline. Leave the threaded portions out of the gap measurement.

How many joints come with one option?

Each option includes one expansion joint in the size and color you select.

Notes
  • Not responsible for any damage caused by or when using this product. Use at your own risk.

FormulaMod Official Store

Recent Reviews
+